法治世界網 -

國際標準(ISO)

IEC 60695-11-10:1999 -著火危險試驗 - 第11-10部分：試驗火焰 - 50W水平與垂直火焰試驗方法
Fire hazard testing -- Part 11-10: Test flames -- 50 W horizontal and vertical flame test methods
IEC 60695-11-10:1999/Amd 1:2003 -
IEC 60695-11-20:1999 -著火危險試驗 - 第11-20：試驗火焰 - 500W火焰的試驗方法
Fire hazard testing -- Part 11-20: Test flames -- 500 W flame test methods
IEC 60695-11-20:1999/Amd 1:2003 -
ISO 10082:1999 -塑料--酚醛樹脂--分類和測試方法
Plastics -- Phenolic resins -- Classification and test methods
ISO 10093:1998 -塑料--燃燒測試--標準火源
Plastics -- Fire tests -- Standard ignition sources
ISO 10210:2012 -塑料 - 方法的樣品製備用於塑料材料的生物降解測試
Plastics -- Methods for the preparation of samples for biodegradation testing of plastic materials
ISO 10350-1:2007 -塑料--比較式單點資料的採集和標記法--第1部分：模塑材料
Plastics -- Acquisition and presentation of comparable single-point data -- Part 1: Moulding materials
ISO 10350-1:2007/FDAmd 1 -
ISO 10366-1:2002 -塑料--甲基丙烯酸甲酯/丁二烯/苯乙烯共聚物(ABS)的模塑和擠塑材料--命名系統和規範基礎
Plastics -- Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO 10366-2:2003 -塑料--甲基丙烯酸甲酯/丙烯?/丁二烯/苯乙烯(MABS)模塑和擠塑材料--第2部分：試樣製備和性能測定
Plastics -- Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
ISO 1043-1:2011 -塑料 - 符號和縮略語 - 第1部分：基礎聚合物及其特徵性能
Plastics -- Symbols and abbreviated terms -- Part 1: Basic polymers and their special characteristics
ISO 1043-2:2011 -塑料 - 符號和縮略語 - 第2部分：填充及增強材料
Plastics -- Symbols and abbreviated terms -- Part 2: Fillers and reinforcing materials
ISO 1043-3:1996 -塑料--符號和縮寫--第3部分：增塑劑
Plastics -- Symbols and abbreviated terms -- Part 3: Plasticizers
ISO 1043-4:1998 -塑料--符號和縮寫--第4部分：阻燃劑
Plastics -- Symbols and abbreviated terms -- Part 4: Flame retardants
ISO 1060-1:1998 -塑料--氯乙烯的均聚物和共聚物樹脂--第1部分：命名體系和基本規範
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Part 1: Designation system and basis for specifications
ISO 1060-2:1998 -塑料--氯乙烯的均聚物和共聚物樹脂--第2部分：試樣的製備和性能的測定
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Part 2: Preparation of test samples and determination of properties
ISO 1061:1990 -塑料--未增塑的乙酸纖維素--遊離酸度的測定
Plastics -- Unplasticized cellulose acetate -- Determination of free acidity
ISO 10640:2011 -塑料 - 方法論評估聚合物光老化紅外光譜和紫外/可見光譜
Plastics -- Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy
ISO 1068:1975 -塑料--聚氯乙烯(PVC)樹脂--壓實的表觀容積密度的測定
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of compacted apparent bulk density
ISO 10724-1:1998 -塑料--熱固性粉末模塑複合物試樣的注射模塑成型--第1部分：一般原則和多用途試樣的模塑成型
Plastics -- Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) -- Part 1: General principles and moulding of multipurpose test specimens
ISO 10724-2:1998 -塑料--熱固性粉末模塑複合物試樣的注射模塑成型--第2部分：小板材
Plastics -- Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) -- Part 2: Small plates
ISO 10840:2008 -塑料--標準燃燒測試的使用指南
Plastics -- Guidance for the use of standard fire tests
ISO 10927:2011 -塑料 - 的分子量和聚合物種類的分子質量分佈通過飛行時間型的基質輔助激光解吸/電離質譜測定法（MALDI-TOF-MS）
Plastics -- Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS)
ISO 1110:1995 -塑料--聚醯胺--試樣的加速狀態調節
Plastics -- Polyamides -- Accelerated conditioning of test specimens
ISO 11248:1993 -塑料--熱固性模塑料--溫升時短暫性能的評估
Plastics -- Thermosetting moulding materials -- Evaluation of short-term performance at elevated temperatures
ISO 1133-1:2011 -塑料 - 熔體質量流動速率（MFR）的測定和熔體體積流動熱塑性塑料的速率（MVR） - 第1部分：標準的方法
Plastics -- Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics -- Part 1: Standard method
ISO 1133-2:2011 -塑料 - 熔體質量流動速率（MFR）和熔體體積流動熱塑性塑料的速率（MVR）的測定 - 第2部分：材料的時間 - 溫度歷史和/或濕氣敏感的方法
Plastics -- Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics -- Part 2: Method for materials sensitive to time-temperature history and/or moisture
ISO 11337:2010 -塑料 - 聚酰胺 - 電子己內酰胺和ω-十二內酰胺氣相色譜法測定
Plastics -- Polyamides -- Determination of e-caprolactam and w-laurolactam by gas chromatography
ISO 11357-1:2009 -塑料--差示掃描量熱法(DSC)--第1部分：總則
Plastics -- Differential scanning calorimetry (DSC) -- Part 1: General principles
ISO 11357-2:2013 -塑料 - 差示掃描量熱法（DSC） - 第2部分：玻璃化轉變溫度和玻璃化轉變的台階高度的測定
Plastics -- Differential scanning calorimetry (DSC) -- Part 2: Determination of glass transition temperature and glass transition step height
ISO 11357-3:2011 -塑料 - 差示掃描量熱法（DSC） - 第3部分：溫度熔融和結晶焓的測定
Plastics -- Differential scanning calorimetry (DSC) -- Part 3: Determination of temperature and enthalpy of melting and crystallization
ISO 11357-4:2005 -塑料--差示掃描量熱法(DSC)--第4部分：比熱容的測定
Plastics -- Differential scanning calorimetry (DSC) -- Part 4: Determination of specific heat capacity
ISO 11357-5:2013 -塑料 - 差示掃描量熱法（DSC） - 第5部：反應特性曲線的溫度和時間，反應和轉化程度的熱焓的測定
Plastics -- Differential scanning calorimetry (DSC) -- Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion
ISO 11357-6:2008 -塑料--差示掃描量熱法(DSC)--第6部分：氧化誘導時間(等溫OIT)和氧化誘導溫度(動態OIT)的測定
Plastics -- Differential scanning calorimetry (DSC) -- Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)
ISO 11357-7:2002 -塑料--差示掃描量熱法(DSC)--第7部分：結晶動力的測定
Plastics -- Differential scanning calorimetry (DSC) -- Part 7: Determination of crystallization kinetics
ISO 11358-2:2005 -塑料--高聚物的熱重分析法(TG)--第2部分：活化能測定
Plastics -- Thermogravimetry (TG) of polymers -- Part 2: Determination of activation energy
ISO 11358-3 -塑料 - 熱重分析（TG）的聚合物 - 第3部分：使用小澤 - 弗里德曼陰謀的反應動力學和分析活化能的測定
Plastics -- Thermogravimetry (TG) of polymers -- Part 3: Determination of the activation energy using the Ozawa-Friedman plot and analysis of the reaction kinetics
ISO 11358:1997 -塑料--高聚物的熱重分析法(TG)--一般原則
Plastics -- Thermogravimetry (TG) of polymers -- General principles
ISO 11359-1:1999 -塑料--熱力學分析(TMA)--第1部分：一般原則
Plastics -- Thermomechanical analysis (TMA) -- Part 1: General principles
ISO 11359-2:1999 -塑料--熱力學分析(TMA)--第2部分：線性熱膨脹係數和玻璃化轉變溫度的測定
Plastics -- Thermomechanical analysis (TMA) -- Part 2: Determination of coefficient of linear thermal expansion and glass transition temperature
ISO 11359-3:2002 -塑料--熱力學分析(TMA)--第3部分：滲透溫度的測定
Plastics -- Thermomechanical analysis (TMA) -- Part 3: Determination of penetration temperature
ISO 11401:1993 -塑料--酚醛樹脂--用液相色譜法分離
Plastics -- Phenolic resins -- Separation by liquid chromatography
ISO 11402:2004 -酚醛樹脂、氨基樹脂和縮合樹脂--遊離甲醛含量的測定
Phenolic, amino and condensation resins -- Determination of free-formaldehyde content
ISO 11403-1:2001 -塑料--比較式多點資料的採集和表示--第1部分：力學性能
Plastics -- Acquisition and presentation of comparable multipoint data -- Part 1: Mechanical properties
ISO 11403-2:2012 -塑料 - 採集和表示的可比多點數據 - 第2部分：熱性能和加工性能
Plastics -- Acquisition and presentation of comparable multipoint data -- Part 2: Thermal and processing properties
ISO 11403-3:1999 -塑料--比較式多點資料的採集和表示--第3部分：環境對性能的影響
Plastics -- Acquisition and presentation of comparable multipoint data -- Part 3: Environmental influences on properties
ISO 11409:1993 -塑料--酚醛樹脂--用差示掃描量熱法測定反應熱及溫度
Plastics -- Phenolic resins -- Determination of heats and temperatures of reaction by differential scanning calorimetry
ISO 11443:2005 -塑料--用毛細管和狹縫流變儀測定塑膠的流動性
Plastics -- Determination of the fluidity of plastics using capillary and slit-die rheometers
ISO 11468:1997 -塑料--測試用聚氯乙烯糊料的製備--溶解方法
Plastics -- Preparation of PVC pastes for test purposes -- Dissolver method
ISO 11469:2000 -塑料--塑膠產品的一般鑒定和標誌
Plastics -- Generic identification and marking of plastics products
ISO 1147:1995 -塑膠/橡膠--聚合物分散體和合成橡膠膠乳--凍結-融化迴圈穩定性測試
Plastics/rubber -- Polymer dispersions and synthetic rubber latices -- Freeze-thaw cycle stability test
ISO 11542-1:2001 -塑料--超高分子量聚乙烯(PE-UHMW)模塑和擠塑材料--第1部分：命名系統和基本規範
Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO 11542-2:1998 -塑料--超高分子量聚乙烯(PE-UHMW)模塑和擠塑材料--第2部分：試樣的製備和性能的測定
Plastics -- Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
ISO 11542-2:1998/Cor 1:2007 -
ISO 1158:1998 -塑料--氯乙烯均聚物和共聚物--氯含量的測定
Plastics -- Vinyl chloride homopolymers and copolymers -- Determination of chlorine content
ISO 1163-1:1995 -塑料--未增塑聚氯乙烯(PUC-U)模塑和擠塑材料--第1部分：命名系統和基本規範
Plastics -- Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO 1163-2:1995 -塑料--未增塑聚氯乙烯(PUC-U)模塑和擠塑材料--第2部分：性能的測定
Plastics -- Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
ISO 1183-1:2012 -塑料 - 方法確定非泡沫塑料的密度 - 第1部分：浸漬法，液體比重瓶法和滴定法
Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pyknometer method and titration method
ISO 1183-2:2004 -塑料--非泡沫塑料的密度測定方法--第2部分：密度梯度管法
Plastics -- Methods for determining the density of non-cellular plastics -- Part 2: Density gradient column method
ISO 1183-3:1999 -塑料--非泡沫塑料的密度測定方法--第3部分：氣體比重瓶法
Plastics -- Methods for determining the density of non-cellular plastics -- Part 3: Gas pyknometer method
ISO 11907-1:1998 -塑料--煙霧產生--火焰效應腐蝕性的測定--第1部分：指南
Plastics -- Smoke generation -- Determination of the corrosivity of fire effluents -- Part 1: Guidance
ISO 11907-2:1995 -塑料--煙霧產生--火焰效應腐蝕性的測定--第2部分：靜態法
Plastics -- Smoke generation -- Determination of the corrosivity of fire effluents -- Part 2: Static method
ISO 11907-3:1998 -塑料--煙霧產生--火焰效應腐蝕性的測定--第3部分：使用移動式熔爐的動態分解法
Plastics -- Smoke generation -- Determination of the corrosivity of fire effluents -- Part 3: Dynamic decomposition method using a travelling furnace
ISO 11907-4:1998 -塑料--煙霧產生--火焰效應腐蝕性的測定--第4部分：使用熱輻射式加熱器的動態分解法
Plastics -- Smoke generation -- Determination of the corrosivity of fire effluents -- Part 4: Dynamic decomposition method using a conical radiant heater
ISO 119:1977 -塑料--酚-醛模塑件--遊離酚的測定--碘量法
Plastics -- Phenol-formaldehyde mouldings -- Determination of free phenols -- Iodometric method
ISO 12000:2000 -塑膠/橡膠--聚合物分散體和橡膠膠乳(天然和合成)--測試方法的確定和評述
Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Definitions and review of test methods
ISO 12058-1:1997 -塑料--使用落球式粘度計測定粘度--第1部分：斜管法
Plastics -- Determination of viscosity using a falling-ball viscometer -- Part 1: Inclined-tube method
ISO 12086-1:2006 -塑料--含氟聚合物分散體模塑和擠塑材料--第1部分：命名系統和基本規範
Plastics -- Fluoropolymer dispersions and moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO 12086-1:2006/Cor 1:2006 -
ISO 12086-2:2006 -塑料--含氟聚合物分散體模塑和擠塑材料--第2部分：試樣的製備和性能的測定
Plastics -- Fluoropolymer dispersions and moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
ISO 12086-2:2006/Cor 1:2006 -
ISO 120:1977 -塑料--酚-醛模塑件--遊離氨和銨化合物的測定--比色法
Plastics -- Phenol-formaldehyde mouldings -- Determination of free ammonia and ammonium compounds -- Colorimetric comparison method
ISO 12418-1:2012 -塑料 - 消費後聚對苯二甲酸乙二醇酯（PET）瓶回收料 - 第1部分：命名系統和基本規範
Plastics -- Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates -- Part 1: Designation system and basis for specifications
ISO 12418-2:2012 -塑料 - 消費後聚對苯二甲酸乙二醇酯（PET）瓶回收料 - 第2部分：試樣製備和性能測定
Plastics -- Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates -- Part 2: Preparation of test specimens and determination of properties
ISO 1264:1980 -塑料--氯乙烯均聚物和共聚物樹脂--水萃取物的pH值測定
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of pH of aqueous extract
ISO 1265:2007 -塑料--聚氯乙烯樹脂--雜質和外來微粒數量的測定
Plastics -- Poly(vinyl chloride) resins -- Determination of number of impurities and foreign particles
ISO 1269:2006 -塑料--氯乙烯的均聚物和共聚物樹脂--揮發性物質(包括水分)的測定
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of volatile matter (including water)
ISO 12992:1995 -塑料--塑膠薄膜和片材垂直燃燒蔓延程度的測定
Plastics -- Vertical flame spread determination for film and sheet
ISO 13468-1:1996 -塑料--透明材料光透射率總量的測定--第1部分：單束光發射儀器
Plastics -- Determination of the total luminous transmittance of transparent materials -- Part 1: Single-beam instrument
ISO 13468-2:1999 -塑料--透明材料光透射率總量的測定--第2部分：雙束光發射儀器
Plastics -- Determination of the total luminous transmittance of transparent materials -- Part 2: Double-beam instrument
ISO 13586:2000 -塑料--斷裂韌性的測定()和()--線彈性斷裂力學法
Plastics -- Determination of fracture toughness (GIC and KIC) -- Linear elastic fracture mechanics (LEFM) approach
ISO 13586:2000/Amd 1:2003 -不連續增強纖維的注塑成形塑膠測試指南
Guidelines for the testing of injection-moulded plastics containing discontinuous reinforcing fibres
ISO 13741-1:1998 -塑膠/橡膠--聚合物分散體和橡膠膠乳(天然和合成)--測定殘留單體和其他有機成分的毛細管柱氣相色譜--第1部分：直接液體注入法
Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Determination of residual monomers and other organic components by capillary-column gas chromatography -- Part 1: Direct liquid injection method
ISO 13741-2:1998 -塑膠/橡膠--聚合物分散體和橡膠膠乳(天然和合成)--測定殘留單體和其他有機成分的毛細管柱氣相色譜--第2部分：頂空法
Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Determination of residual monomers and other organic components by capillary-column gas chromatography -- Part 2: Headspace method
ISO 13927:2001 -塑料--用錐形輻射加熱器和熱電堆探測器進行簡單熱釋放測試
Plastics -- Simple heat release test using a conical radiant heater and a thermopile detector
ISO 13975:2012 -塑料 - 塑料材料在受控漿消化系統的最終厭氧生物降解 - 沼氣生產的測量方法
Plastics -- Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems -- Method by measurement of biogas production
ISO 1409:2006 -塑膠/橡膠--聚合物分散體和橡膠膠乳(天然和合成)--用環形法測定表面張力
Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Determination of surface tension by the ring method
ISO 14322:2012 -塑料 - 環氧樹脂 - 測定的交聯的環氧樹脂，通過差示掃描量熱法交聯度的
Plastics -- Epoxy resins -- Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry
ISO 14526-1:1999 -塑料--酚醛粉末模塑化合物(PF-PMCs)--第1部分：命名體系及基本規範
Plastics -- Phenolic powder moulding compounds (PF-PMCs) -- Part 1: Designation system and basis for specifications
ISO 14526-2:1999 -塑料--酚醛粉末模塑化合物(PF-PMCs)--第2部分：試樣的製備和性能的測定
Plastics -- Phenolic powder moulding compounds (PF-PMCs) -- Part 2: Preparation of test specimens and determination of properties
ISO 14526-3:1999 -塑料--酚醛粉末模塑化合物(PF-PMCs)--第3部分：對所選模塑化合物的要求
Plastics -- Phenolic powder moulding compounds (PF-PMCs) -- Part 3: Requirements for selected moulding compounds
ISO 14527-1:1999 -塑料--?醛和?/蜜胺酚醛粉末模塑化合物(UF-和UF/MF-PMCs)--第1部分：命名體系及基本規範
Plastics -- Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) -- Part 1: Designation system and basis for specifications
ISO 14527-2:1999 -塑料--?醛和?/蜜胺酚醛粉末模塑化合物(UF-和UF/MF-PMCs)--第2部分：試樣的製備和性能的測定
Plastics -- Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) -- Part 2: Preparation of test specimens and determination of properties
ISO 14527-3:1999 -塑料--?醛和?/蜜胺酚醛粉末模塑化合物(UF-和UF/MF-PMCs)--第3部分：對所選的模塑化合物的要求
Plastics -- Urea-formaldehyde and urea/melamine-formaldehyde powder moulding compounds (UF- and UF/MF-PMCs) -- Part 3: Requirements for selected moulding compounds
ISO 14528-1:1999 -塑料--蜜胺酚醛粉末模塑化合物(MF-PMCs)--第1部分：命名體系及基本規範
Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 1: Designation system and basis for specifications
ISO 14528-2:1999 -塑料--蜜胺酚醛粉末模塑化合物(MF-PMCs)--第2部分：試樣的製備和性能的測定
Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 2: Preparation of test specimens and determination of properties
ISO 14528-3:1999 -塑料--蜜胺酚醛粉末模塑化合物(MF-PMCs)--第3部分：對所選擇的模塑化合物的要求
Plastics -- Melamine-formaldehyde powder moulding compounds (MF-PMCs) -- Part 3: Requirements for selected moulding compounds
ISO 14529-1:1999 -塑料--蜜胺/酚醛粉末模塑化合物{MP-PMCs)--第1部分：命名體系及基本規範
Plastics -- Melamine/phenolic powder moulding compounds (MP-PMCs) -- Part 1: Designation system and basis for specifications
ISO 14529-2:1999 -塑料--蜜胺/酚醛粉末模塑化合物(MP-PMCs)--第2部分：試樣的製備和性能的測定
Plastics -- Melamine/phenolic powder moulding compounds (MP-PMCs) -- Part 2: Preparation of test specimens and determination of properties
ISO 14529-3:1999 -塑料--蜜胺/酚醛粉末模塑化合物(MP-PMCs)--第3部分：對選擇的模塑化合物的要求
Plastics -- Melamine/phenolic powder moulding compounds (MP-PMCs) -- Part 3: Requirements for selected moulding compounds
ISO 14530-1:1999 -塑料--不飽和聚酯粉末模塑化合物(UP-PMCs)--第1部分：命名體系及基本規範
Plastics -- Unsaturated-polyester powder moulding compounds (UP-PMCs) -- Part 1: Designation system and basis for specifications
ISO 14530-2:1999 -塑料--不飽和聚酯粉末模塑化合物(UP-PMCs)--第2部分：試樣的製備和性能的測定
Plastics -- Unsaturated-polyester powder moulding compounds (UP-PMCs) -- Part 2: Preparation of test specimens and determination of properties
ISO 14530-3:1999 -塑料--不飽和聚酯粉末模塑化合物(UP-PMCs)--第3部分：對所選擇模塑化合物的要求
Plastics -- Unsaturated-polyester powder moulding compounds (UP-PMCs) -- Part 3: Requirements for selected moulding compounds
ISO 14663-1:1999 -塑料--乙烯/乙烯醇(EVOH)共聚物模塑和擠塑材料--第1部分：命名系統和基本規範
Plastics -- Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO 14663-2:1999 -塑料--乙烯/乙烯醇(EVOH)共聚物模塑和擠塑材料--第2部分：試樣的製備和性能的測定
Plastics -- Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
ISO 14782:1999 -塑料--透明材料模糊性的測定
Plastics -- Determination of haze for transparent materials
ISO 14782:1999/Cor 1:2005 -
ISO 14848:1998 -塑料--不飽和聚酯樹脂--130℃時反應特性測定
Plastics -- Unsaturated-polyester resins -- Determination of reactivity at 130 degrees C
ISO 14849:1999 -塑料--酚-醛模塑件--遊離氨和銨化合物測定--靛酚法
Plastics -- Phenol-formaldehyde mouldings -- Determination of free ammonia and ammonium compounds -- Indophenol method
ISO 14851:1999 -水介質中塑膠材料富氧菌生物降解性的測定--在一封閉呼吸器中測定需氧量的方法
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium -- Method by measuring the oxygen demand in a closed respirometer
ISO 14851:1999/Cor 1:2005 -
ISO 14852:1999 -水介質中塑膠材料富氧菌生物降解性的測定--二氧化碳釋放分析法
Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium -- Method by analysis of evolved carbon dioxide
ISO 14852:1999/Cor 1:2005 -
ISO 14853:2005 -塑料--含水系統中塑膠材料富氧菌生物降解性的測定--生物氣產生的測量方法
Plastics -- Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system -- Method by measurement of biogas production
ISO 14853:2005/Cor 1:2009 -
ISO 14855-1:2012 -一般方法： - 通過釋放的二氧化碳的分析方法 - 第1部分受控堆肥條件下塑料材料最終需氧生物降解能力的測定
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions -- Method by analysis of evolved carbon dioxide -- Part 1: General method
ISO 14855-2:2007 -塑膠材料在受控堆肥環境下最終需氧生物降解度的測定--二氧化碳釋放分析法--第2部分：實驗室規模測試中釋
Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions -- Method by analysis of evolved carbon dioxide -- Part 2: Gravimetric measurement of carbon dioxide evolved in a laboratory-scale test
ISO 14855-2:2007/Cor 1:2009 -
ISO 14896:2006/Amd 1:2007 -方法B程序中可接受之變數
Acceptable variations in the procedure for method B
ISO 14896:2009 -塑料--聚氨酯原材料--異氰酸酯的測定
Plastics -- Polyurethane raw materials -- Determination of isocyanate content
ISO 14897:2002 -塑料--用於聚氨酯生產的多元醇--水含量的測定
Plastics -- Polyols for use in the production of polyurethane -- Determination of water content
ISO 14898:1999 -塑料--用於聚氨酯生產的芳族異氰酸酯--酸度測定
Plastics -- Aromatic isocyanates for use in the production of polyurethane -- Determination of acidity
ISO 14898:1999/Amd 1:2011 -
ISO 14899:2001 -塑料--用於聚氨酯生產的多元醇--鹼性測定
Plastics -- Polyols for use in the production of polyurethane -- Determination of basicity
ISO 14900:2001 -塑料--用於聚氨酯生產的多元醇--羥基數的測定
Plastics -- Polyols for use in the production of polyurethane -- Determination of hydroxyl number
ISO 14900:2001/Cor 1:2005 -
ISO 14910-1:2013 -塑料 - 熱塑性聚酯/酯和聚醚/酯彈性體模塑和擠塑 - 第1部分：命名體系和基礎規範
Plastics -- Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion -- Part 1: Designation system and basis for specification
ISO 14910-2:2013 -塑料 - 熱塑性聚酯/酯和聚醚/酯彈性體模塑和擠塑 - 第2部分：試樣製備和性能測定
Plastics -- Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion -- Part 2: Preparation of test specimens and determination of properties
ISO 15023-1:2001 -塑料--聚乙烯醇(PVAL)材料--第1部分：規範用命名體系和依據
Plastics -- Poly(vinyl alcohol) (PVAL) materials -- Part 1: Designation system and basis for specifications
ISO 15023-2:2003 -塑料--聚乙烯醇(PVAL)材料--第2部分：特性的測定
Plastics -- Poly(vinyl alcohol) (PVAL) materials -- Part 2: Determination of properties
ISO 15028:2004 -塑料--用於聚氨酯生產的芳族異氰酸酯--可水解氯的測定
Plastics -- Aromatic isocyanates for use in the production of polyurethanes -- Determination of hydrolysable chlorine
ISO 15033:2007 -塑料--用高效液相色譜法(HPLC)測定己內醯胺及其環狀和線性齊聚物
Plastics -- Determination of caprolactam and its cyclic and linear oligomers by HPLC
ISO 15063:2011 -塑料 - 多元醇用於生產聚氨酯的應用 - 近紅外光譜法測定羥基數
Plastics -- Polyols for use in the production of polyurethanes -- Determination of hydroxyl number by NIR spectroscopy
ISO 15064:2010 -塑料--用於聚氨酯生產的芳族異氰酸酯--測定異構體比例
Plastics -- Aromatic isocyanates for use in the production of polyurethanes -- Determination of the isomer ratio in toluenediisocyanate
ISO 15103-2:2007 -塑料--聚苯醚(PPE)模制和擠壓成型材料--第2部分：試樣製備和特性測定
Plastics -- Poly(phenylene ether) (PPE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
ISO 15252-1:1999 -塑料--環氧樹脂模塑化合物(EP-PMCs)--第1部分：命名體系及基本規範
Plastics -- Epoxy powder moulding compounds (EP-PMCs) -- Part 1: Designation system and basis for specifications
ISO 15252-2:1999 -塑料--環氧樹脂模塑化合物(EP-PMCs)--第2部分：試樣的準備和特性的測定
Plastics -- Epoxy powder moulding compounds (EP-PMCs) -- Part 2: Preparation of test specimens and determination of properties
ISO 15252-3:1999 -塑料--環氧樹脂模塑化合物(EP-PMCs)--第3部分：對所選模塑化合物的要求
Plastics -- Epoxy powder moulding compounds (EP-PMCs) -- Part 3: Requirements for selected moulding compounds
ISO 15270:2008 -塑料--廢水再迴圈和再利用指南
Plastics -- Guidelines for the recovery and recycling of plastics waste
ISO 15314:2004 -塑料--海上曝光法
Plastics -- Methods for marine exposure
ISO 15373:2001 -塑料--聚合物分散體--自由甲醛的測定
Plastics -- Polymer dispersions -- Determination of free formaldehyde
ISO 15512:2008 -塑料--水含量的測定
Plastics -- Determination of water content
ISO 15791-1 -塑料 - 中間規模的火災試驗對塑料產品的開發和使用 - 第1部分：通則
Plastics -- Development and use of intermediate-scale fire tests for plastics products -- Part 1: General guidance
ISO 15791-1:2002 -塑料--塑膠產品用中間標度燃燒測試的研製和應用--一般導則
Plastics -- Development and use of intermediate-scale fire tests for plastics products -- Part 1: General guidance
ISO 15850:2002 -塑料--牽引力-牽引疲勞裂紋延伸長度的測定--機械直線彈性破碎近似值
Plastics -- Determination of tension-tension fatigue crack propagation -- Linear elastic fracture mechanics (LEFM) approach
ISO 15853:1999 -熱塑性塑料--為測定注塑用材料的靜液壓強度的管狀試樣的準備
Thermoplastics materials -- Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding
ISO 15985:2004 -塑料--在高固相厭氧消化條件下測定最終厭氧生物降解和分解作用--釋放的沼氣分析法
Plastics -- Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions -- Method by analysis of released biogas
ISO 15985:2004/Cor 1:2007 -
ISO 1598:1990 -塑料--乙酸纖維素--不溶物的測定
Plastics - Cellulose acetate -- Determination of insoluble particles
ISO 1599:1990 -塑料--乙酸纖維素--模塑時粘度降低的測定
Plastics -- Cellulose acetate -- Determination of viscosity loss on moulding
ISO 1600:1990 -塑料--乙酸纖維素--利用熱的不同迴圈在生產模制樣品中光吸收量的測定
Plastics -- Cellulose acetate -- Determination of light absorption on moulded specimens produced using different periods of heating
ISO 16012:2004 -塑料--測試樣品的線性尺寸測定
Plastics -- Determination of linear dimensions of test specimens
ISO 16012:2004/Cor 1:2005 -
ISO 16014-1:2012 -塑料 - 平均分子質量和使用尺寸排阻色譜聚合物的分子質量分佈的測定 - 第1部分：總則
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 1: General principles
ISO 16014-2:2012 -塑料 - 平均分子質量的測定，並用尺寸排阻色譜法聚合物的分子量分佈 - 第2部分：通用校準方法
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 2: Universal calibration method
ISO 16014-3:2012 -塑料 - 平均分子質量的測定，並用尺寸排阻色譜法聚合物的分子量分佈 - 第3部分：低溫方法
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 3: Low-temperature method
ISO 16014-4:2012 -塑料 - 平均分子質量的測定，並使用尺寸排阻色譜聚合物的分子質量分佈 - 第4部分：高溫法
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 4: High-temperature method
ISO 16014-5:2012 -塑料 - 均分子量，並使用尺寸排阻色譜法聚合物的分子量分佈的測定 - 第5部：在使用光散射檢測法
Plastics -- Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography -- Part 5: Method using light-scattering detection
ISO 16152:2005 -塑料--聚丙烯中二甲苯可溶物測定
Plastics -- Determination of xylene-soluble matter in polypropylene
ISO 1622-1:2012 -塑料 - 聚苯乙烯（PS）模塑和擠塑材料 - 第1部分：命名系統和基本規範
Plastics -- Polystyrene (PS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO 1622-2:1995 -塑料--聚苯乙烯(PS)模塑和擠塑材料--第2部分：試樣的製備和性能的測定
Plastics -- Polystyrene (PS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
ISO 1624:2001 -塑料--氯乙烯均聚物和共聚物樹脂--水中篩析
Plastics -- Vinyl chloride homopolymer and copolymer resins -- Sieve analysis in water
ISO 1628-1:2009 -塑料--使用毛細管粘度計測定稀溶液中聚合物的粘度--第1部分：一般原理
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 1: General principles
ISO 1628-1:2009/Amd 1:2012 -
ISO 1628-2:1998 -塑料--使用毛細管粘度計測定稀溶液中聚合物的粘度--第2部分：聚氯乙烯樹脂
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 2: Poly(vinyl chloride) resins
ISO 1628-3:2010 -塑料--使用毛細管粘度計測定稀溶液中聚合物的粘度--第3部分：聚乙烯和聚丙烯
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 3: Polyethylenes and polypropylenes
ISO 1628-4:1999 -塑料--使用毛細管粘度計測定稀溶液中聚合物的粘度--第4部分：聚碳酸酯(PC)模塑和擠塑材料
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 4: Polycarbonate (PC) moulding and extrusion materials
ISO 1628-5:1998 -塑料--使用毛細管粘度計測定稀溶液中聚合物的粘度--第5部分：熱塑性聚酯(TP)均聚物和共聚物
Plastics -- Determination of the viscosity of polymers in dilute solution using capillary viscometers -- Part 5: Thermoplastic polyester (TP) homopolymers and copolymers
ISO 1628-6:1990 -塑料--粘數和極限粘數的測定--第6部分：甲基丙烯酸甲酯聚合物
Plastics -- Determination of viscosity number and limiting viscosity number -- Part 6: Methyl methacrylate polymers
ISO 1675:1985 -塑料--液態樹脂--比重瓶法測定密度
Plastics -- Liquid resins -- Determination of density by the pyknometer method
ISO 16770:2004 -塑料--聚乙烯環境應力斷裂(ESC)的測定--全切口蠕變測試(FNCT)
Plastics -- Determination of environmental stress cracking (ESC) of polyethylene -- Full-notch creep test (FNCT)
ISO 16790:2005 -塑料--熱塑性塑膠熔融狀態下的拉伸特性測定
Plastics -- Determination of drawing characteristics of thermoplastics in the molten state
ISO 16869:2008 -塑料--塑膠成份中抑制真菌化合物的效果評估
Plastics -- Assessment of the effectiveness of fungistatic compounds in plastics formulations
ISO 16929:2013 -塑料 - 定義堆肥條件中試規模試驗下塑料材料崩解程度的測定
Plastics -- Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
ISO 17088:2012 -規格可堆肥塑料
Specifications for compostable plastics
ISO 171:1980 -塑料--模塑材料體積係數的測定
Plastics -- Determination of bulk factor of moulding materials
ISO 17281:2002 -塑料--在適度高負載速率(1 m/s)下斷裂韌性(G和K)的測定
Plastics -- Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)
ISO 17282:2004 -塑料--設計資料的獲取和表示用指南
Plastics -- Guide to the acquisition and presentation of design data
ISO 172:1978 -塑料--酚-醛模塑件--遊離氨的檢驗
Plastics -- Phenol-formaldehyde mouldings -- Detection of free ammonia
ISO 17422:2002 -塑料--環境方面--標準中環境方面的一般指南
Plastics -- Environmental aspects -- General guidelines for their inclusion in standards
ISO 17556:2012 -塑料 - 塑料材料在土壤中的最終需氧生物降解通過測定需氧量的呼吸或二氧化碳析出量的測定
Plastics -- Determination of the ultimate aerobic biodegradability of plastic materials in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
ISO 175:2010 -塑料--浸入液體化學藥品的影響測定的測試方法
Plastics -- Methods of test for the determination of the effects of immersion in liquid chemicals
ISO 176:2005 -塑料--增塑劑損耗的測定--活性碳法
Plastics -- Determination of loss of plasticizers -- Activated carbon method
ISO 17710:2002 -塑料--用於聚氨酯生產的多元醇--不飽和度的測定
Plastics -- Polyols for use in the production of polyurethane -- Determination of degree of unsaturation by microtitration
ISO 17744:2004 -塑料--作為溫度和壓力函數的比容的測定(pvT圖)--活塞裝置法
Plastics -- Determination of specific volume as a function of temperature and pressure (pvT diagram) -- Piston apparatus method
ISO 177:1988 -塑料--增塑劑分散性的測定
Plastics -- Determination of migration of plasticizers
ISO 178:2010 -塑料 - 彎曲性能的
Plastics -- Determination of flexural properties
ISO 178:2010/Amd 1:2013 -
ISO 178:2010/NP Amd 2 -
ISO 179-1:2010 -塑料--擺錘式衝擊特性的測定--第1部分：非儀器衝擊測試
Plastics -- Determination of Charpy impact properties -- Part 1: Non-instrumented impact test
ISO 179-2:1997 -塑料--擺錘式衝擊特性的測定--第2部分：儀器衝擊測試
Plastics -- Determination of Charpy impact properties -- Part 2: Instrumented impact test
ISO 179-2:1997/Amd 1:2011 -精密數據
Precision data
ISO 179-2:1997/Cor 1:1998 -
ISO 18064:2003 -熱塑彈性體--術語和縮略語
Thermoplastic elastomers -- Nomenclature and abbreviated terms
ISO 180:2000 -塑料--伊兆特(Izod)衝擊強度的測定
Plastics -- Determination of Izod impact strength
ISO 180:2000/Amd 1:2006 -
ISO 180:2000/Amd 2:2013 -精密數據
Precision data
ISO 182-1:1990 -塑料--基於氯乙烯共聚物、均聚物的化合物及產物在高溫下析出氯化氫和其他酸性產物的趨勢測定--第1部分：剛果紅
Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 1: Congo red method
ISO 182-2:1990 -塑料--基於氯乙烯共聚物、均聚物的化合物及產物在高溫下析出氯化氫和其他酸性產物的趨勢測定--第2部分：pH值法
Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 2: pH method
ISO 182-3:1993 -塑料--基於氯乙烯共聚物、均聚物的化合物及產物在高溫下析出氯化氫和其他酸性產物的趨勢測定--第3部分：電導測
Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 3: Conductometric method
ISO 182-4:1993 -塑料--基於氯乙烯共聚物、均聚物的化合物及產物在高溫下析出氯化氫和其他酸性產物的趨勢測定--第4部分：電位測
Plastics -- Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures -- Part 4: Potentiometric method
ISO 18280:2010 -塑料--環氧樹脂--測試方法
Plastics -- Epoxy resins -- Test methods
ISO 1872-1:1993 -塑料--聚乙烯(PE)模塑和擠塑材料--第1部分：命名體系和基本規範
Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO 1872-2:2007 -塑料--聚乙烯(PE)模塑和擠塑材料--第2部分：試樣製備和性能測定
Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
ISO 1873-1:1995 -塑料--聚丙烯(PP)模塑和擠塑材料--第1部分：標識系統和規範基礎
Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO 1873-2:2007 -塑料--聚丙烯(PP)模塑和擠塑材料--第2部分：試樣製備和性能測定
Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
ISO 1874-1:2010 -塑料--聚醯胺(PA)模塑和擠塑材料--第1部分：命名系統和基礎規範
Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 1: Designation system and basis for specification
ISO 1874-2:2012 -塑料 - 聚酰胺（PA）模塑和擠塑材料 - 第2部分：試樣製備和性能測定
Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
ISO 1875:1982 -塑料--增塑的乙酸纖維素--乙醚萃取物測定
Plastics -- Plasticized cellulose acetate -- Determination of matter extractable by diethyl ether
ISO 18872:2007 -塑料--測定高應變率拉伸特性
Plastics -- Determination of tensile properties at high strain rates
ISO 19252:2008 -塑料--劃痕性能的測定
Plastics -- Determination of scratch properties
ISO 19892:2011 -塑料管道系統 - 熱塑性塑料管材和管件的熱水和冷水 - 測試方法接頭的耐循環壓力
Plastics piping systems -- Thermoplastics pipes and fittings for hot and cold water -- Test method for the resistance of joints to pressure cycling
ISO 20200:2004 -塑料--在實驗室測試中模擬堆肥處理條件下測定塑膠的分解度
Plastics -- Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
ISO 2039-1:2001 -塑料--硬度測定--第1部分：壓球法
Plastics -- Determination of hardness -- Part 1: Ball indentation method
ISO 2039-2:1987 -塑料--硬度測定--第2部分：洛氏硬度
Plastics -- Determination of hardness -- Part 2: Rockwell hardness
ISO 20753:2008 -塑料--試樣
Plastics -- Test specimens
ISO 20965:2005 -塑料--聚合物熔體瞬態拉伸粘度的測定
Plastics -- Determination of the transient extensional viscosity of polymer melts
ISO 21048:2004 -塑料--環氧樹脂--1，2-乙二醇含量的測定
Plastics -- Epoxy resins -- Determination of 1,2-glycol content
ISO 2115:1996 -塑料--聚合物分散體--白點溫度和最低成膜溫度的測定
Plastics -- Polymer dispersions -- Determination of white point temperature and minimum film-forming temperature
ISO 21318:2007 -塑料--環氧樹脂--測定水樹脂萃取物電導率
Plastics -- Epoxy resins -- Determination of electrical conductivity of aqueous resin extracts
ISO 21367:2007 -塑料--對火的反應--火焰擴散和垂直向試樣燃燒產物釋放的測試方法
Plastics -- Reaction to fire -- Test method for flame spread and combustion product release from vertically oriented specimens
ISO 21509:2006 -塑膠和硬質橡膠--肖氏硬度計的識別
Plastics and ebonite -- Verification of Shore durometers
ISO 21627-1:2009 -塑料--環氧樹脂--氯含量的測定--第1部分：無機氯
Plastics -- Epoxy resins -- Determination of chlorine content -- Part 1: Inorganic chlorine
ISO 21627-2:2009 -塑料--環氧樹脂--氯含量的測定--第2部分：易皂化氯
Plastics -- Epoxy resins -- Determination of chlorine content -- Part 2: Easily saponifiable chlorine
ISO 21627-3:2009 -塑料--環氧樹脂--氯含量的測定--第3部分：總氯
Plastics -- Epoxy resins -- Determination of chlorine content -- Part 3: Total chlorine
ISO 22007-1:2009 -塑料--熱傳導率和熱擴散率的測定--第1部分：總則
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 1: General principles
ISO 22007-2:2008 -塑料--熱傳導率和熱擴散率的測定--第2部分：暫態平面熱源(發熱盤)法
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 2: Transient plane heat source (hot disc) method
ISO 22007-3:2008 -塑料--熱傳導率和熱擴散率的測定--第3部分：溫度波形分析方法
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 3: Temperature wave analysis method
ISO 22007-4:2008 -塑料--熱傳導率和熱擴散率的測定--第4部分：鐳射閃光法
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 4: Laser flash method
ISO 22088-1:2006 -塑料--耐環境應力開裂(ESC)測定--第1部分：通用指南
Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 1: General guidance
ISO 22088-2:2006 -塑膠製品--耐環境應力開裂(ESC)測定--第2部分：恒定拉伸負荷法
Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 2: Constant tensile load method
ISO 22088-3:2006 -塑膠製品--耐環境應力開裂(ESC)測定--第3部分：彎曲帶法
Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 3: Bent strip method
ISO 22088-4:2006 -塑膠製品--耐環境應力開裂(ESC)測定--第4部分：球或針形壓衡痕法
Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 4: Ball or pin impression method
ISO 22088-5:2006 -塑料--耐環境應力開裂(ESC)的測定--第5部分：恒定拉伸變形方法
Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 5: Constant tensile deformation method
ISO 22088-6:2006 -塑料--耐環境應力開裂(ESC)的測定--第6部分：慢應變率方法
Plastics -- Determination of resistance to environmental stress cracking (ESC) -- Part 6: Slow strain rate method
ISO 22196:2011 -抗菌活性的塑料和其它無孔表面測
Measurement of antibacterial activity on plastics and other non-porous surfaces
ISO 22498:2005 -塑料--氯乙烯均聚物和共聚物樹脂--採用機械篩分的細微性測定
Plastics -- Vinyl chloride homopolymer and copolymer resins -- Particle size determination by mechanical sieving
ISO 24538:2008 -塑料--氯乙烯均聚物和共聚物樹脂--使用乾性粉末氣相色譜分析測定殘留氯乙烯單體
Plastics -- Homopolymer and copolymer resins of vinyl chloride -- Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder
ISO 25137-1:2009 -塑料--?聚合物模制和擠出材料--第1部分：標記系統和基礎規範
Plastics -- Sulfone polymer moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO 25137-2:2009 -塑料--?聚合物模制和擠出材料--第2部分：試樣的製備和性能的測定
Plastics -- Sulfone polymer moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
ISO 25337:2010 -塑料--生產質量控制--單測量統計方法
Plastics -- Production quality control -- Statistical method for using single measurements
ISO 2535:2001 -塑料--不飽和聚酯樹脂室溫時膠凝時間的測量
Plastics -- Unsaturated-polyester resins -- Measurement of gel time at ambient temperature
ISO 2554:1997 -塑料--不飽和聚酯樹脂--羥基值的測定
Plastics -- Unsaturated polyester resins -- Determination of hydroxyl value
ISO 2555:1989 -塑膠--液體或乳液或分散型樹脂--第1部分:布魯克菲爾得（BROOKFIELD）測試測定表觀粘度
Plastics -- Resins in the liquid state or as emulsions or dispersions -- Determination of apparent viscosity by the Brookfield Test method
ISO 2561:2012 -塑料 - 聚苯乙烯中的殘餘苯乙烯單體（PS）和耐衝擊性聚苯乙烯（PS-I）由氣相色譜法測定
Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO 25761:2008 -塑料--用於聚氨酯生產的多元醇--氮百分比表示的鹼度(總胺值)的測定
Plastics -- Polyols for use in the production of polyurethanes -- Determination of basicity (total amine value), expressed as percent nitrogen
ISO 25762:2009 -塑料--纖維增強聚合物複合材料的火災特點與防火性能的評估指南
Plastics -- Guidance on the assessment of the fire characteristics and fire performance of fibre-reinforced polymer composites
ISO 2577:2007 -塑料--熱固性模塑料--收縮率的測定
Plastics -- Thermosetting moulding materials -- Determination of shrinkage
ISO 2578:1993 -塑料--長期熱暴露作用後時間和溫度極限的測定
Plastics -- Determination of time-temperature limits after prolonged exposure to heat
ISO 2580-1:2002 -塑料--丙烯?-丁二烯-苯乙烯共聚物(ABS)的模塑和擠塑材料--第1部分：命名系統和基本規範
Plastics -- Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO 2580-2:2003 -塑料--丙烯?-丁二烯-苯乙烯共聚物(ABS)的模塑和擠塑材料--第2部分：試樣製備和性能測定
Plastics -- Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
ISO 26603:2008 -塑料--用於聚氨酯生產的芳族異氰酸酯--總氯含量的測定
Plastics -- Aromatic isocyanates for use in the production of polyurethanes -- Determination of total chlorine
ISO 27547-1:2010 -塑料--使用無模具熱塑性材料技術2的試樣製備--第1部分：一般原則，鐳射燒結試樣
Plastics -- Preparation of test specimens of thermoplastic materials using mouldless technologies -- Part 1: General principles, and laser sintering of test specimens
ISO 28078-1:2009 -塑料--聚苯硫(PPS)模塑化合物--第1部分：命名體系及基本規範
Plastics -- Poly(phenylene sulfide) (PPS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO 28078-2:2009 -塑料--聚苯硫(PPS)模塑化合物--第2部分：試樣的製備和特性的測定
Plastics -- Poly(phenylene sulfide) (PPS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
ISO 2818:1994 -塑料--試樣的機加工製備
Plastics -- Preparation of test specimens by machining
ISO 2818:1994/Cor 1:2007 -
ISO 28941-1:2008 -塑料--聚苯醚(PPE)模制和擠壓成型材料--第1部分：命名體系和基本規範
Plastics -- Poly(phenylene ether) (PPE) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO 2897-1:1997 -塑料--耐衝擊聚苯乙烯(PS-I)模塑和擠塑材料--第1部分：命名系統和基本規範
Plastics -- Impact-resistant polystyrene (PS-I) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO 2897-2:2003 -塑料--耐衝擊聚苯乙烯(PS-I)模塑和擠塑材料--第2部分：試樣製備和性能測定
Plastics -- Impact-resistant polystyrene (PS-I) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
ISO 2898-1:1996 -塑料--增塑聚氯乙烯(PVC-P)模塑和擠塑材料--第1部分：命名系統和基礎規範
Plastics -- Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO 2898-2:2008 -塑料--增塑聚氯乙烯(PVC-P)模塑和擠塑材料--第2部分：試樣製備和性能測定
Plastics -- Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
ISO 291:2008 -塑料--調節和測試用標準大氣
Plastics -- Standard atmospheres for conditioning and testing
ISO 29221 -塑料 - 的模式I平面應變裂紋逮捕韌性的測定
Plastics -- Determination of mode I plane-strain crack-arrest toughness
ISO 293:2004 -塑料--熱塑性材料的壓模塑試樣
Plastics -- Compression moulding of test specimens of thermoplastic materials
ISO 294-1:1996 -塑料--熱塑性材料試樣的注模塑法--第1部分：一般原則、多用途模塑件及條形試樣
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 1: General principles, and moulding of multipurpose and bar test specimens
ISO 294-1:1996/Amd 1:2001 -
ISO 294-1:1996/Amd 2:2005 -保壓壓力與保壓時間測定法
Methods of determining the hold pressure and hold time
ISO 294-2:1996 -塑料--熱塑性材料試樣的注模塑法--第2部分：小拉伸棒
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 2: Small tensile bars
ISO 294-2:1996/Amd 1:2004 -
ISO 294-3:2002 -塑料--注塑成型試樣的熱塑性材料--第3部分：小板
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 3: Small plates
ISO 294-3:2002/Amd 1:2006 -
ISO 294-4:2001 -塑料--注塑成型試樣的熱塑性材料--第4部分：模塑收縮率的測定
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 4: Determination of moulding shrinkage
ISO 294-5:2011 -塑料 - 熱塑性塑料材料注塑試樣的製備 - 第5部分：調查各向異性製備標準試樣
Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 5: Preparation of standard specimens for investigating anisotropy
ISO 295:2004 -塑料--熱固性材料試樣的壓模塑法
Plastics -- Compression moulding of test specimens of thermosetting materials
ISO 29664:2010 -塑料--包括酸沉降之人工風化
Plastics -- Artificial weathering including acidic deposition
ISO 3001:1999 -塑料--環氧化合物--環氧基當量的測定
Plastics -- Epoxy compounds -- Determination of epoxy equivalent
ISO 30021:2013 -塑料 - 燃燒性能 - 纖維增強聚合物複合材料的中級規模的耐火測試
Plastics -- Burning behaviour -- Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites
ISO 305:1990 -塑料--聚氯乙烯和有關均聚合物和共聚物及其混合物的熱穩定性的測定--色變法
Plastics -- Determination of thermal stability of poly(vinyl chloride), related chlorine-containing homopolymers and copolymers and their compounds -- Discoloration method
ISO 306:2013 -塑料 - 熱塑性材料 - 維卡軟化溫度（VST）的測定
Plastics -- Thermoplastic materials -- Determination of Vicat softening temperature (VST)
ISO 307:2007 -塑料--聚醯胺--粘度值的測定
Plastics -- Polyamides -- Determination of viscosity number
ISO 307:2007/Amd 1:2013 -更正和更新，以參照JIS K6920-2
Corrections, and update to reference to JIS K 6920-2
ISO 308:1994 -塑料--酚醛模塑材料--丙酮可溶性物質(在未模塑狀態時表現樹脂含量)的測定
Plastics -- Phenolic moulding materials -- Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state)
ISO 3146:2000 -塑料--用毛細管和偏振顯微鏡測定半晶狀聚合物的熔化性能(熔化溫度或熔化區域)
Plastics -- Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods
ISO 3146:2000/Cor 1:2002 -
ISO 3167:2002 -塑料--多用途試樣
Plastics -- Multipurpose test specimens
ISO 3219:1993 -塑料--液態或乳態或分散狀的聚合物/樹脂--使用規定剪切率的旋轉式粘度計測定粘度
Plastics -- Polymers/resins in the liquid state or as emulsions or dispersions -- Determination of viscosity using a rotational viscometer with defined shear rate
ISO 3451-1:2008 -塑料--灰分的測定--第1部分：通用方法
Plastics -- Determination of ash -- Part 1: General methods
ISO 3451-2:1998 -塑料--灰分的測定--第2部分：聚對苯二甲酸烯烴酯法
Plastics -- Determination of ash -- Part 2: Poly(alkylene terephthalate) materials
ISO 3451-3:1984 -塑料--灰分的測定--第3部分：未增塑的乙酸纖維素
Plastics -- Determination of ash -- Part 3: Unplasticized cellulose acetate
ISO 3451-4:1998 -塑料--灰分的測定--第4部分：聚醯胺
Plastics -- Determination of ash -- Part 4: Polyamides
ISO 3451-5:2002 -塑料--灰分的測定--第5部分：聚氯乙烯
Plastics -- Determination of ash -- Part 5: Poly(vinyl chloride)
ISO 3521:1997 -塑料--不飽和聚酯和環氧樹脂--總體積收縮率的測定
Plastics -- Unsaturated polyester and epoxy resins -- Determination of overall volume shrinkage
ISO 3521:1997/Cor 1:2003 -
ISO 3671:1976 -塑料--氨基模塑材料--揮發性物質的測定
Plastics -- Aminoplastic moulding materials -- Determination of volatile matter
ISO 3672-1:2000 -塑料--不飽和聚酯樹脂--第1部分：命名體系
Plastics -- Unsaturated-polyester resins (UP-R) -- Part 1: Designation system
ISO 3672-2:2000 -塑料--不飽和聚酯樹脂--第2部分：試樣的製備和特性的測定
Plastics -- Unsaturated-polyester resins (UP-R) -- Part 2: Preparation of test specimens and determination of properties
ISO 3673-1:1996 -塑料--環氧樹脂--第1部分：命名
Plastics -- Epoxy resins -- Part 1: Designation
ISO 3673-2:2012 -塑料 - 環氧樹脂 - 第2部分：試驗樣品的製備和測定交聯的環氧樹脂的性能
Plastics -- Epoxy resins -- Part 2: Preparation of test specimens and determination of properties of crosslinked epoxy resins
ISO 3915:1981 -塑料--導電塑膠電阻率的測量
Plastics -- Measurement of resistivity of conductive plastics
ISO 4574:1978 -塑料--通用聚氯乙烯(PVC)樹脂--熱增塑劑吸收率測定
Plastics -- PVC resins for general use -- Determination of hot plasticizer absorption
ISO 4575:2007 -塑料--聚氯乙烯糊料--使用賽佛爾斯(Severs)流變儀測定表觀粘度
Plastics -- Poly(vinyl chloride) pastes -- Determination of apparent viscosity using the Severs rheometer
ISO 4576:1996 -塑料--聚合物分散體--篩餘物的測定(粗粒和凝固物含量)
Plastics -- Polymer dispersions -- Determination of sieve residue (gross particle and coagulum content)
ISO 4577:1983 -塑料--聚丙烯和丙烯共聚物--空氣中熱氧化穩定性的測定--烘箱法
Plastics -- Polypropylene and propylene-copolymers -- Determination of thermal oxidative stability in air -- Oven method
ISO 458-1:1985 -塑料--柔性材料扭曲剛度的測定--第1部分：一般方法
Plastics -- Determination of stiffness in torsion of flexible materials -- Part 1: General method
ISO 458-2:1985 -塑料--柔性材料扭曲剛度的測定--第2部分：適宜於氯乙烯的均聚物和共聚物的增塑物
Plastics -- Determination of stiffness in torsion of flexible materials -- Part 2: Application to plasticized compounds of homopolymers and copolymers of vinyl chloride
ISO 4581:1994 -塑料--苯乙烯/丙烯?共聚物--剩餘的丙烯?單體含量的測定--氣相色譜法
Plastics -- Styrene/acrylonitrile copolymers -- Determination of residual acrylonitrile monomer content -- Gas chromatography method
ISO 4582:2007 -塑料--暴露於透過玻璃的日光、自然風化或實驗室光源以後顏色改變和性能變化的測定
Plastics -- Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources
ISO 4589-1:1996 -塑料--通過氧指數測定其燃燒性--第1部分：指南
Plastics -- Determination of burning behaviour by oxygen index -- Part 1: Guidance
ISO 4589-2:1996 -塑料--通過氧指數測定其燃燒性--第2部分：室溫測試
Plastics -- Determination of burning behaviour by oxygen index -- Part 2: Ambient-temperature test
ISO 4589-2:1996/Amd 1:2005 -
ISO 4589-3:1996 -塑料--通過氧指數測定其燃燒性--第3部分：高溫測試
Plastics -- Determination of burning behaviour by oxygen index -- Part 3: Elevated-temperature test
ISO 4597-1:2005 -塑料--環氧樹脂用固化劑和促進劑--第1部分：命名
Plastics -- Hardeners and accelerators for epoxy resins -- Part 1: Designation
ISO 4608:1998 -塑料--一般用途之氯乙烯均聚物和共聚物樹脂--室溫下增塑劑吸收測定
Plastics -- Homopolymer and copolymer resins of vinyl chloride for general use -- Determination of plasticizer absorption at room temperature
ISO 4610:2001 -塑料--氯乙烯均聚物和共聚物樹脂--用空氣噴射篩濾器進行篩析
Plastics -- Vinyl chloride homopolymer and copolymer resins -- Sieve analysis using air-jet sieve apparatus
ISO 4611:2010 -塑膠--暴露於濕熱、噴水和鹽霧中產生效應的測定
Plastics -- Determination of the effects of exposure to damp heat, water spray and salt mist
ISO 4612:1999 -塑料--測試用聚氯乙烯糊料的製備--齒輪傳動混合方法
Plastics -- Preparation of PVC pastes for test purposes -- Planetary-mixer method
ISO 4613-1:1993 -塑料--乙酸乙烯/乙烯酯(E/VAC)模塑和擠塑材料--第1部分：命名和規範
Plastics -- Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials -- Part 1: Designation and specification
ISO 4613-2:1995 -塑料--乙酸乙烯/乙烯酯(E/VAC)模塑和擠塑材料--第2部分：試樣的製備和性能的測定
Plastics -- Ethylene/vinyl acetate (E/VAC) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
ISO 4613-2:1995/Amd 1:2004 -
ISO 4614:1977 -塑料--三聚氰胺-甲醛模塑件--可萃取的甲醛的測定
Plastics -- Melamine-formaldehyde mouldings -- Determination of extractable formaldehyde
ISO 4615:1979 -塑料--不飽和聚酯和環氧樹脂--總氯量的測定
Plastics -- Unsaturated polyesters and epoxide resins -- Determination of total chlorine content
ISO 472:2013 -塑料 - 詞彙
Plastics -- Vocabulary
ISO 472:2013/NP Amd 1 -
ISO 4892-1:1999 -塑料--實驗室光源暴露方法--第1部分：通用指南
Plastics -- Methods of exposure to laboratory light sources -- Part 1: General guidance
ISO 4892-2:2013 -塑料 - 暴露於實驗室光源的方法 - 第2部分：氙弧燈
Plastics -- Methods of exposure to laboratory light sources -- Part 2: Xenon-arc lamps
ISO 4892-3:2013 -塑料 - 暴露於實驗室光源的方法 - 第3部分：熒光紫外燈
Plastics -- Methods of exposure to laboratory light sources -- Part 3: Fluorescent UV lamps
ISO 4892-4:2013 -塑料 - 暴露於實驗室光源的方法 - 第4部分：開放式碳弧燈
Plastics -- Methods of exposure to laboratory light sources -- Part 4: Open-flame carbon-arc lamps
ISO 4894-1:1997 -塑料--苯乙烯/丙烯?(SAN)模塑和擠塑材料--第1部分：命名體系和基本規範
Plastics -- Styrene/acrylonitrile (SAN) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO 4894-2:1995 -塑料--苯乙烯/丙烯?(SAN)模塑和擠塑材料--第2部分：試樣的製備和性能的測定
Plastics -- Styrene/acrylonitrile (SAN) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
ISO 4895:1997 -塑料--液態環氧樹脂--結晶性的測定
Plastics -- Liquid epoxy resins -- Determination of tendency to crystallize
ISO 489:1999 -塑料--反射指數的測定
Plastics -- Determination of refractive index
ISO 527-1:2012 -塑料 - 拉伸性能的測定 - 第1部分：總則
Plastics -- Determination of tensile properties -- Part 1: General principles
ISO 527-2:2012 -塑料 - 拉伸性能的測定 - 第2部分：模壓和擠壓塑料試驗條件
Plastics -- Determination of tensile properties -- Part 2: Test conditions for moulding and extrusion plastics
ISO 5659-2:2012 -塑料 - 煙霧產生 - 第2部分：測定光密度由單室試驗
Plastics -- Smoke generation -- Part 2: Determination of optical density by a single-chamber test
ISO 584:1982 -塑料--不飽和聚酯樹脂--80℃時的反應性測定(常規方法)
Plastics -- Unsaturated polyester resins -- Determination of reactivity at 80 degrees C (conventional method)
ISO 585:1990 -塑料--未增塑的乙酸纖維素--水分含量的測定
Plastics -- Unplasticized cellulose acetate -- Determination of moisture content
ISO 604:2002 -塑料--壓縮性能的測定
Plastics -- Determination of compressive properties
ISO 60:1977 -塑料--專用漏斗注入的材料，表觀密度的測定
Plastics -- Determination of apparent density of material that can be poured from a specified funnel
ISO 6133:1998 -橡膠和塑料--撕裂強度和粘合強度測定中的多峰曲線分析
Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength
ISO 6186:1998 -塑料--澆注性的測定
Plastics -- Determination of pourability
ISO 61:1976 -塑料--不能用專用漏斗注入的模壓材料表觀密度的測定
Plastics -- Determination of apparent density of moulding material that cannot be poured from a specified funnel
ISO 62:2008 -塑料--吸水性的測定
Plastics -- Determination of water absorption
ISO 6401:2008 -塑料--氯乙烯--剩餘氯乙烯單體的測定--氣相色譜法
Plastics -- Poly(vinyl chloride) -- Determination of residual vinyl chloride monomer -- Gas-chromatographic method
ISO 6402-1:2002 -塑料--丙烯?-苯乙烯-丙烯酸酯、丙烯?-(乙烯-丙烯-二烯烴)-苯乙烯和丙烯?-(氯化聚乙烯)-苯乙烯模制和擠壓
Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO 6402-2:2003 -塑料--丙烯?-苯乙烯-丙烯酸酯、丙烯?-(乙烯-丙烯-二烯烴)-苯乙烯和丙烯?-(氯化聚乙烯)-苯乙烯模制和擠壓
Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
ISO 6427:2013 -塑料 - 測定物質的提取用有機溶劑（傳統方法）
Plastics -- Determination of matter extractable by organic solvents (conventional methods)
ISO 6601:2002 -塑料--滑動摩擦和磨損--測試參數鑒別
Plastics -- Friction and wear by sliding -- Identification of test parameters
ISO 6603-1:2000 -塑料--硬質塑膠沖孔性能的測定--第1部分：非儀器衝擊測試
Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 1: Non-instrumented impact testing
ISO 6603-2:2000 -塑料--硬質塑膠沖孔性能的測定--第2部分：儀器衝擊測試
Plastics -- Determination of puncture impact behaviour of rigid plastics -- Part 2: Instrumented impact testing
ISO 6691:2000 -滑動軸承用熱塑性聚合物--分類和名稱
Thermoplastic polymers for plain bearings -- Classification and designation
ISO 6721-10:1999 -塑料--動態機械性能的測定--第10部分：使用平板振盪流變儀測定複合剪切粘度
Plastics -- Determination of dynamic mechanical properties -- Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
ISO 6721-11:2012 -塑料 - 動態機械性能的測定 - 第11部分：玻璃化轉變溫度
Plastics -- Determination of dynamic mechanical properties -- Part 11: Glass transition temperature
ISO 6721-12:2009 -塑料--動態機械性能的測定--第12部分：壓縮振動--非共振法
Plastics -- Determination of dynamic mechanical properties -- Part 12: Compressive vibration -- Non-resonance method
ISO 6721-1:2011 -塑料 - 動態機械性能的測定 - 第1部分：總則
Plastics -- Determination of dynamic mechanical properties -- Part 1: General principles
ISO 6721-2:2008 -塑料--動態機械性能的測定--第2部分：扭擺法
Plastics -- Determination of dynamic mechanical properties -- Part 2: Torsion-pendulum method
ISO 6721-3:1994 -塑料--動態機械性能的測定--第3部分：彎曲振動--共振法
Plastics -- Determination of dynamic mechanical properties -- Part 3: Flexural vibration -- Resonance-curve method
ISO 6721-3:1994/Cor 1:1995 -
ISO 6721-4:2008 -塑料--動態機械性能的測定--第4部分：拉伸振動--非共振法
Plastics -- Determination of dynamic mechanical properties -- Part 4: Tensile vibration -- Non-resonance method
ISO 6721-5:1996 -塑料--動態機械性能的測定--第5部分：彎曲振動--非共振法
Plastics -- Determination of dynamic mechanical properties -- Part 5: Flexural vibration -- Non-resonance method
ISO 6721-5:1996/Amd 1:2007 -
ISO 6721-6:1996 -塑料--動態機械性能的測定--第6部分：剪力振動--非共振法
Plastics -- Determination of dynamic mechanical properties -- Part 6: Shear vibration -- Non-resonance method
ISO 6721-6:1996/Amd 1:2007 -
ISO 6721-7:1996 -塑料--動態機械性能的測定--第7部分：扭擺振動--非共振法
Plastics -- Determination of dynamic mechanical properties -- Part 7: Torsional vibration -- Non-resonance method
ISO 6721-7:1996/Amd 1:2007 -
ISO 6721-8:1997 -塑料--動態機械性能的測定--第8部分：徑向剪切震動--波傳播方法
Plastics -- Determination of dynamic mechanical properties -- Part 8: Longitudinal and shear vibration -- Wave-propagation method
ISO 6721-9:1997 -塑料--動態機械性能的測定--第9部分：拉伸振動--聲脈衝傳波方法
Plastics -- Determination of dynamic mechanical properties -- Part 9: Tensile vibration -- Sonic-pulse propagation method
ISO 6721-9:1997/Amd 1:2007 -精确性
Precision
ISO 7327:1994 -塑料--環氧樹脂用固化劑和促進劑--酸酐中游離酸測定
Plastics -- Hardeners and accelerators for epoxide resins -- Determination of free acid in acid anhydride
ISO 7391-1:2006 -塑料--聚碳酸酯模塑和擠塑材料--第1部分：命名體系和基本規範
Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO 7391-2:2006 -塑料--聚碳酸酯模塑和擠塑材料--第2部分：試樣製備和特性測定
Plastics -- Polycarbonate (PC) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
ISO 75-1:2013 -塑料 - 負荷變形溫度的測定 - 第1部分：通用試驗方法
Plastics -- Determination of temperature of deflection under load -- Part 1: General test method
ISO 75-2:2013 -塑料 - 負荷變形溫度的測定 - 第2部分：塑料和硬橡膠
Plastics -- Determination of temperature of deflection under load -- Part 2: Plastics and ebonite
ISO 75-3:2004 -塑料--載荷下撓曲溫度的測定--第3部分：高強度熱固性疊層板和長纖維增強塑膠
Plastics -- Determination of temperature of deflection under load -- Part 3: High-strength thermosetting laminates and long-fibre-reinforced plastics
ISO 7792-1:2012 -塑料 - 熱塑性聚酯（TP）模塑和擠塑材料 - 第1部分：命名系統和基本規範
Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO 7792-2:2012 -塑料 - 熱塑性聚酯（TP）模塑和擠塑材料 - 第2部分：試樣製備和性能測定
Plastics -- Thermoplastic polyester (TP) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
ISO 7808:1992 -塑料--熱固性模塑料--傳遞流動性的測定
Plastics -- Thermosetting moulding materials -- Determination of transfer flow
ISO 8256:2004 -塑料--拉伸衝擊強度測定
Plastics -- Determination of tensile-impact strength
ISO 8257-1:1998 -塑料--聚甲基丙烯酸甲酯(PMMA)模塑和擠塑材料--第1部分：命名體系和基本規範
Plastics -- Poly(methyl methacrylate) (PMMA) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO 8257-2:2001 -塑料--聚甲基丙烯酸甲酯(PMMA)模塑和擠塑材料--第2部分：試樣的製備和性能的測定
Plastics -- Poly(methyl methacrylate) (PMMA) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
ISO 846:1997 -塑料--微生物作用的評價
Plastics -- Evaluation of the action of microorganisms
ISO 8619:2003 -塑料--酚醛樹脂粉--在加熱玻璃板上流動距離的測定
Plastics -- Phenolic resin powder -- Determination of flow distance on a heated glass plate
ISO 8660:2002 -塑料--己內醯胺的高錳酸鹽吸收指數的側定--光譜分析法
Plastics -- Determination of permanganate absorption number of caprolactam -- Spectrometric method
ISO 868:2003 -塑膠和硬質橡膠--用硬度計測定針入硬度[肖氏(SHORE)硬度]
Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness)
ISO 871:2006 -塑料--用熱風爐測定點火溫度
Plastics -- Determination of ignition temperature using a hot-air furnace
ISO 877-1:2009 -塑料--太陽輻射下暴露方法--第1部分：一般指南
Plastics -- Methods of exposure to solar radiation -- Part 1: General guidance
ISO 877-2:2009 -塑料--太陽輻射下暴露方法--第2部分：直接風乾和暴露在玻璃窗後
Plastics -- Methods of exposure to solar radiation -- Part 2: Direct weathering and exposure behind window glass
ISO 877-3:2009 -塑料--太陽輻射下暴露方法--第3部分：應用聚光太陽輻射強化風乾
Plastics -- Methods of exposure to solar radiation -- Part 3: Intensified weathering using concentrated solar radiation
ISO 8974:2002 -塑料--酚醛樹脂--用氣體色譜法測定殘餘酚的含量
Plastics -- Phenolic resins -- Determination of residual phenol content by gas chromatography
ISO 8975:1989 -塑料--酚醛樹脂--pH值的測定
Plastics -- Phenolic resins -- Determination of pH
ISO 8985:1998 -塑料--乙烯/乙酸乙烯共聚物(EVAC)熱塑塑料--乙酸乙烯含量的測定
Plastics -- Ethylene/vinyl acetate copolymer (EVAC) thermoplastics -- Determination of vinyl acetate content
ISO 8986-1:2009 -塑料--聚丁烯-1(PB-1)模壓和擠制材料--第1部分：命稱與符號和規範的基礎
Plastics -- Polybutene-1 (PB-1) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO 8986-2:2009 -塑料--聚丁烯-1(PB-1)模壓和擠制材料--第2部分：試樣製備和特性測定
Plastics -- Polybutene-1 (PB-1) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
ISO 8987:2005 -塑料--酚醛樹脂--在B-轉變測試板上的活化性能的測定
Plastics -- Phenolic resins -- Determination of reactivity on a B-transformation test plate
ISO 8988:2006 -塑料--酚醛樹脂--六次甲基四胺含量的測定--凱氏法、過氯酸法和氯化氫鹽酸法
Plastics -- Phenolic resins -- Determination of hexamethylenetetramine content -- Kjeldahl method, perchloric acid method and hydrochloric acid method
ISO 8989:1995 -塑料--液態酚醛樹脂--水溶物的測定
Plastics -- Liquid phenolic resins -- Determination of water miscibility
ISO 899-1:2003 -塑料--蠕變性能的測定--第1部分：拉伸蠕變
Plastics -- Determination of creep behaviour -- Part 1: Tensile creep
ISO 899-1:2003/DAmd 1 -
ISO 899-2:2003 -塑料--蠕變性能的測定--第2部分：用三點負載測定撓曲蠕變
Plastics -- Determination of creep behaviour -- Part 2: Flexural creep by three-point loading
ISO 899-2:2003/DAmd 1 -
ISO 9113:1986 -塑料--聚丙烯(PP)模塑和擠塑材料--等規指數測定
Plastics -- Polypropylene (PP) and propylene-copolymer thermoplastics -- Determination of isotactic index
ISO 9352:2012 -塑料 - 電阻測定砂輪磨損
Plastics -- Determination of resistance to wear by abrasive wheels
ISO 9370:2009 -塑料--儀器測定輻射暴露風化測試--通用指南和基本測試方法
Plastics -- Instrumental determination of radiant exposure in weathering tests -- General guidance and basic test method
ISO 9396:1997 -塑料--酚醛樹脂--使用自動裝置對規定條件下酚醛樹脂凝膠時間的測定
Plastics -- Phenolic resins -- Determination of the gel time of resols under specific conditions using automatic apparatus
ISO 9702:1996 -塑料--胺類環氧固化劑--伯仲叔胺基含氮量的測定
Plastics -- Amine epoxide hardeners -- Determination of primary, secondary and tertiary amine group nitrogen content
ISO 974:2000 -塑料--衝擊脆化溫度的測定
Plastics -- Determination of the brittleness temperature by impact
ISO 9771:1995 -塑料--酚醛樹脂--在酸性條件處理時液體酚醛樹脂假隔熱溫升的測定
Plastics -- Phenolic resins -- Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions
ISO 9773:1998 -塑料--立式軟薄試樣與小火焰源接觸的燃燒性能測定
Plastics -- Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
ISO 9773:1998/Amd 1:2003 -樣本
Specimens
ISO 9944:1990 -塑料--酚醛樹脂--樹脂萃取物電導率的測定
Plastics -- Phenolic resins -- Determination of electrical conductivity of resin extracts
ISO 9944:1990/Cor 1:1997 -
ISO 9988-1:2004 -塑料--聚甲醛模塑和擠塑材料--第1部分：命名體系和基本規範
Plastics -- Polyoxymethylene (POM) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO 9988-2:2006 -塑料--聚甲醛模塑和擠塑材料--第2部分：試樣製備和性能測定
Plastics -- Polyoxymethylene (POM) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties
ISO/CD 15023-1 -塑料 - 聚（乙烯醇）（PVAL）材料 - 第1部分：命名系統和基本規範
Plastics -- Poly(vinyl alcohol) (PVAL) materials -- Part 1: Designation system and basis for specifications
ISO/CD 16620-1 -塑料 - 生物基含量 - 第1部分：總則
Plastics -- Biobased content -- Part 1: General principles
ISO/CD 16620-2 -塑料 - 生物基含量 - 第2部分：生物基碳含量的測定
Plastics -- Biobased content -- Part 2: Determination of biobased carbon content
ISO/CD 16620-3 -塑料 - 生物基含量 - 第3部分：生物基合成聚合物含量的測定
Plastics -- Biobased content -- Part 3: Determination of biobased synthetic polymer content
ISO/CD 16620-4 -塑料 - 生物基含量 - 第4部分：總質量生物基含量的測定
Plastics -- Biobased content -- Part 4: Determination of the total biobased mass content
ISO/CD 17282 -塑料 - 指南設計數據的採集和介紹
Plastics -- Guide to the acquisition and presentation of design data
ISO/CD 18064 -熱塑性彈性體 - 術語和縮略語
Thermoplastic elastomers -- Nomenclature and abbreviated terms
ISO/CD 18247 -塑料 - 聚合物的剪切粘度的熔體採用螺旋式流變儀
Plastics -- Determination of the shear viscosity of polymer melts using screw-type rheometers
ISO/CD 18263-1 -塑料 - 混合聚丙烯（PP）和聚乙烯（PE）再生材料 - 第1部分：命名系統和基本規範
Plastics -- Mixed polypropylene (PP) and polyethylene (PE) recyclate -- Part 1: Designation system and basis for specifications
ISO/CD 18263-2 -塑料 - 混合聚丙烯（PP）和聚乙烯（PE）再生材料 - 第2部分：試樣製備和性能測定
Plastics -- Mixed polypropylene (PP) and polyethylene (PE) recyclate -- Part 2: Preparation of test specimens and determination of properties
ISO/CD 18830 -塑料 - 試驗方法測定塑料沉沒在海水/沙質沉積物界面的好氧生物降解
Plastics -- Test method for determining aerobic biodegradation of plastic materials sunk at the sea water/sandy sediment interface
ISO/CD 28660 -塑料 - 的J-R的關係曲線的測定
Plastics -- Determination of J-R curves
ISO/CD 6721-10 -塑料 - 動態機械性能的測定 - 第10部分：用平行板振盪流變儀複合剪切粘度
Plastics -- Determination of dynamic mechanical properties -- Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer
ISO/DIS 11357-4 -塑料 - 差示掃描量熱法（DSC） - 第4部分：比熱容測定
Plastics -- Differential scanning calorimetry (DSC) -- Part 4: Determination of specific heat capacity
ISO/DIS 11357-7 -塑料 - 差示掃描量熱法（DSC） - 第7部分：結晶動力學的測定
Plastics -- Differential scanning calorimetry (DSC) -- Part 7: Determination of crystallization kinetics
ISO/DIS 11358-1 -塑料 - 熱重分析（TG）的聚合物 - 第1部分：總則
Plastics -- Thermogravimetry (TG) of polymers -- Part 1: General principles
ISO/DIS 11403-1 -塑料 - 採集和表示的可比多點數據 - 第1部分：機械性能
Plastics -- Acquisition and presentation of comparable multipoint data -- Part 1: Mechanical properties
ISO/DIS 11403-3 -塑料 - 採集和表示的可比多點數據 - 第3部分：環境性能的影響
Plastics -- Acquisition and presentation of comparable multipoint data -- Part 3: Environmental influences on properties
ISO/DIS 12000 -塑料/橡膠 - 聚合物分散體和橡膠膠乳（天然的和合成的） - 定義和審查的測試方法
Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Definitions and review of test methods
ISO/DIS 13927 -塑料 - 簡單熱釋放試驗用錐形輻射加熱器和熱電堆探測器
Plastics -- Simple heat release test using a conical radiant heater and a thermopile detector
ISO/DIS 15028 -塑料 - 芳香族異氰酸酯用於生產聚氨酯的使用 - 可水解氯的測定
Plastics -- Aromatic isocyanates for use in the production of polyurethanes -- Determination of hydrolysable chlorine
ISO/DIS 15512 -塑料 - 水分含量的測定
Plastics -- Determination of water content
ISO/DIS 16012 -塑料 - 測定試樣的線性尺寸的
Plastics -- Determination of linear dimensions of test specimens
ISO/DIS 16365-1 -塑料 - 熱塑性聚氨酯模塑和擠塑 - 第1部分：命名系統和基本規範
Plastics -- Thermoplastic polyurethanes for moulding and extrusion -- Part 1: Designation system and basis for specifications
ISO/DIS 16365-2 -塑料 - 熱塑性聚氨酯模塑和擠塑 - 第2部分：試樣製備和性能測定
Plastics -- Thermoplastic polyurethanes for moulding and extrusion -- Part 2: Preparation of test specimens and determination of properties
ISO/DIS 16365-3 -塑料 - 熱塑性聚氨酯模塑和擠塑 - 第3部分：通過測定酯基含量的醚和酯聚氨酯的區別
Plastics -- Thermoplastic polyurethanes for moulding and extrusion -- Part 3: Distinction between ether and ester polyurethanes by determination of the ester group content
ISO/DIS 16396-1 -塑料 - 聚酰胺（PA）模塑和擠塑材料 - 第1部分：命名系統，產品標識和基本規範
Plastics -- Polyamide (PA) moulding and extrusion materials -- Part 1: Designation system, marking of products and basis for specifications
ISO/DIS 17223 -塑料 - 黃色指數及更改黃色指數的測定
Plastics -- Determination of yellowness index and change in yellowness index
ISO/DIS 17541 -塑料 - 刮引起的損傷和划痕可見性定量評價
Plastics -- Quantitative evaluation of scratch-induced damage and scratch visibility
ISO/DIS 17855-1 -塑料 - 聚乙烯（PE）模塑和擠塑材料 - 第1部分：命名系統和基本規範
Plastics -- Polyethylene (PE) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO/DIS 19065-1 -塑料 - 丙烯腈 - 苯乙烯 - 丙烯酸酯（ASA），丙烯腈 - （乙烯 - 丙烯 - 二烯烴） - 苯乙烯（AEPDS）和丙烯腈 - （氯化聚乙烯） - 苯乙烯（ACS）模塑和擠出材料 - 第1部分：命名系統和基本規範。
Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO/DIS 19066-1 -塑料 - 甲基丙烯酸甲酯 - 丙烯腈 - 丁二烯 - 苯乙烯（MABS）模塑和擠塑材料 - 第1部分：命名系統和基本規範
Plastics -- Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO/DIS 19069-1 -塑料 - 聚丙烯（PP）模塑和擠塑材料 - 第1部分：命名系統和基本規範
Plastics -- Polypropylene (PP) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO/DIS 20200 -塑料 - 模擬堆肥條件下在實驗室規模的試驗下塑料材料崩解程度
Plastics -- Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
ISO/DIS 21048 -塑料 - 環氧樹脂 - 1,2 - 丙二醇含量的測定
Plastics -- Epoxy resins -- Determination of 1,2-glycol content
ISO/DIS 22007-2 -塑料 - 導熱係數和熱擴散係數的測定 - 第2部分：瞬態平面熱源（熱盤）的方法
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 2: Transient plane heat source (hot disc) method
ISO/DIS 22007-6 -塑料 - 第6 - 測定熱導率和熱擴散率：使用溫度調製技術為低導熱率的比較方法
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique
ISO/DIS 25761 -塑料 - 多元醇用於生產聚氨酯的用途 - 鹼度（總胺值）的測定，表示為％的氮
Plastics -- Polyols for use in the production of polyurethanes -- Determination of basicity (total amine value), expressed as percent nitrogen
ISO/DIS 3167 -塑料 - 多用途試樣
Plastics -- Multipurpose test specimens
ISO/DIS 4892-1 -塑料 - 暴露於實驗室光源的方法 - 第1部分：通則
Plastics -- Methods of exposure to laboratory light sources -- Part 1: General guidance
ISO/DIS 4895 -塑料 - 液態環氧樹脂 - 測定傾向的結晶
Plastics -- Liquid epoxy resins -- Determination of tendency to crystallize
ISO/DIS 9773 -塑料 - 燃燒的小火焰點火源接觸的薄柔性垂直試樣性能的測定
Plastics -- Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source
ISO/DTR 17801 -標準表在海平面參考全球太陽光譜輻照度 - 水平，相對空氣質量1
Standard table for reference global solar spectral irradiance at sea level -- Horizontal, relative air mass 1
ISO/DTR 18486 -塑料 - 適合太陽模擬器的光譜分佈為參考太陽光譜分佈中的善良的計算
Plastics -- Calculation of the goodness of fit of the spectral distribution of a solar simulator to a reference solar spectral distribution
ISO/FDIS 11358-2 -塑料 - 熱重（TG）的聚合物 - 第2部分：活化能的測定
Plastics -- Thermogravimetry (TG) of polymers -- Part 2: Determination of activation energy
ISO/FDIS 11443 -塑料 - 塑料的流動性的測定用毛細管和狹縫模流變儀
Plastics -- Determination of the fluidity of plastics using capillary and slit-die rheometers
ISO/FDIS 15850 -塑料 - 拉 - 拉疲勞裂紋擴展的測定 - 線彈性斷裂力學（LEFM）的方法
Plastics -- Determination of tension-tension fatigue crack propagation -- Linear elastic fracture mechanics (LEFM) approach
ISO/FDIS 15985 -塑料 - 高固體厭氧消化條件下的最終厭氧生物降解和解體 - 通過釋放沼氣的分析方法
Plastics -- Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions -- Method by analysis of released biogas
ISO/FDIS 17221 -塑料 - 圖像清晰度的測定（度反射或透射圖像的清晰度）
Plastics -- Determination of image clarity (degree of sharpness of reflected or transmitted image)
ISO/NP 11469 -塑料 - 塑料產品通用標識和標記
Plastics -- Generic identification and marking of plastics products
ISO/NP 11907-1 -塑料 - 煙霧產生 - 火測定污水的腐蝕性 - 第1部分：指南
Plastics -- Smoke generation -- Determination of the corrosivity of fire effluents -- Part 1: Guidance
ISO/NP 12992 -塑料 - 垂直火焰蔓延的決心薄膜和片材
Plastics -- Vertical flame spread determination for film and sheet
ISO/NP 19062-1 -塑料 - 丙烯腈 - 丁二烯 - 苯乙烯（ABS）模塑和擠塑材料 - 第1部分：命名系統和基本規範
Plastics -- Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO/NP 19063-1 -塑料 - 耐衝擊聚苯乙烯（PS-I）模塑和擠塑材料 - 第1部分：命名系統和基本規範
Plastics -- Impact-resistant polystyrene (PS-I) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO/NP 19064-1 -塑料 - 苯乙烯/丙烯腈（SAN）模塑和擠塑材料 - 第1部分：命名系統和基本規範
Plastics -- Styrene/acrylonitrile (SAN) moulding and extrusion materials -- Part 1: Designation system and basis for specifications
ISO/NP 22007-4 -塑料 - 導熱係數和熱擴散係數的測定 - 第4部分：激光閃光法
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 4: Laser flash method
ISO/NP 5659-2 -塑料 - 煙霧產生 - 第2部分：測定光密度由單室試驗
Plastics -- Smoke generation -- Part 2: Determination of optical density by a single-chamber test
ISO/NP TS 15791-2 -塑料 - 中間規模的火災試驗產品的開發和利用
Plastics -- Development and use of intermediate-scale fire tests for products
ISO/PRF 11359-1 -塑料 - 熱機械分析（TMA） - 第1部分：總則
Plastics -- Thermomechanical analysis (TMA) -- Part 1: General principles
ISO/TR 19032:2006 -塑料--監測實驗室和戶外風化條件用聚乙烯標準試樣(PERS)
Plastics -- Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions
ISO/TR 22007-5:2011 -塑料 - 導熱係數和熱擴散係數的測定 - 第5部分：聚實驗室間測試（甲基丙烯酸甲酯）的樣本結果
Plastics -- Determination of thermal conductivity and thermal diffusivity -- Part 5: Results of interlaboratory testing of poly(methyl methacrylate) samples
ISO/TR 4137:1978 -塑料--交替彎曲的彈性模量的測定
Plastics -- Determination of modulus of elasticity by alternating flexure
ISO/TR 5659-3:1999 -塑料--煙霧產生--第3部分：動態流動法測定光密度
Plastics -- Smoke generation -- Part 3: Determination of optical density by a dynamic-flow method