國際標準(ISO)

  • ISO 10398:1998 -橡膠--硫化和未硫化物中促進劑的鑒別
    Rubber -- Identification of accelerators in cured and uncured compounds

  • ISO 11345:2006 -橡膠--碳黑和碳黑/矽土分散性的評估--快速比較法
    Rubber -- Assessment of carbon black and carbon black/silica dispersion -- Rapid comparative methods

  • ISO 11346:2004 -硫化橡膠或熱塑性橡膠--使用生命和最高溫度的估計
    Rubber, vulcanized or thermoplastic -- Estimation of life-time and maximum temperature of use

  • ISO 12493:2011 -硫化橡膠 - 在加熱後拉伸應力的測定
    Rubber, vulcanized -- Determination of stress in tension upon heating

  • ISO 12965:2000 -丁二烯橡膠--用紅外光譜法測定微觀結構
    Butadiene rubber -- Determination of microstructure by infra-red spectrometry

  • ISO 12965:2000/Cor 1:2006 -

  • ISO 13145:2012 -橡膠 - 用無轉子硫化一個測定粘度和應力鬆弛的密封剪切流變儀
    Rubber -- Determination of viscosity and stress relaxation using a rotorless sealed shear rheometer

  • ISO 13226:2011 -橡膠 - 標準參考彈性體（SRES）表徵液體對硫化橡膠的影響
    Rubber -- Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers

  • ISO 132:2011 -硫化橡膠或熱塑性 - 測定屈撓龜裂和裂口增長的（德墨西亞）
    Rubber, vulcanized or thermoplastic -- Determination of flex cracking and crack growth (De Mattia)

  • ISO 13507:2012 -橡膠化合物，橡膠原料及複合材料 - 短術語報告分析證書性質
    Rubber compounds, raw rubbers and compounding materials -- Short terms for properties reported in certificates of analysis

  • ISO 1382:2012 -橡膠 - 詞彙
    Rubber -- Vocabulary

  • ISO 1407:2011 -橡膠 - 測定溶劑提取物
    Rubber -- Determination of solvent extract

  • ISO 1408:1995 -橡膠--炭黑含量的測定--熱解和化學降解法
    Rubber -- Determination of carbon black content -- Pyrolytic and chemical degradation methods

  • ISO 14309:2011 -硫化橡膠或熱塑性 - 體積和/或表面電阻率的測定
    Rubber, vulcanized or thermoplastic -- Determination of volume and/or surface resistivity

  • ISO 1431-1:2012 -硫化橡膠或熱塑性 - 耐臭氧龜裂 - 第1部分：靜態和動態應變測試
    Rubber, vulcanized or thermoplastic -- Resistance to ozone cracking -- Part 1: Static and dynamic strain testing

  • ISO 1431-3:2000 -硫化橡膠或熱塑性橡膠--耐臭氧龜裂--第3部分：實驗室測試箱內測定臭氧濃度的推薦的和可選用的方法
    Rubber, vulcanized or thermoplastic -- Resistance to ozone cracking -- Part 3: Reference and alternative methods for determining the ozone concentration in laboratory test chambers

  • ISO 1432:2013 -硫化橡膠或熱塑性 - 測定低溫硬化（格曼測試）
    Rubber, vulcanized or thermoplastic -- Determination of low-temperature stiffening (Gehman test)

  • ISO 1434:1995 -成包天然橡膠--包裝量測定
    Natural rubber in bales -- Amount of bale coating -- Determination

  • ISO 14558:2000 -橡膠--用紅外光譜法測定氫化丁?橡膠的殘留不飽和物
    Rubber -- Determination of residual unsaturation of hydrogenated nitrile rubber (HNBR) by infrared spectroscopy

  • ISO 15113:2005 -橡膠--摩擦性能的測定
    Rubber -- Determination of frictional properties

  • ISO 15671:2000 -橡膠與橡膠添加劑--用自動分析儀測定總硫含量
    Rubber and rubber additives -- Determination of total sulfur content using an automatic analyser

  • ISO 15672:2000 -橡膠與橡膠添加劑--用自動分析儀測定總氮含量
    Rubber and rubber additives -- Determination of total nitrogen content using an automatic analyser

  • ISO 1629:1995/Amd 1:2007/Cor 1:2009 -

  • ISO 1629:2013 -橡膠和膠乳 - 命名
    Rubber and latices -- Nomenclature

  • ISO 16565:2013 -橡膠 - 測定5 - 亞乙基降冰片（ENB）或雙環戊二烯（DCPD）的乙烯 - 丙烯 - 二烯烴（EPDM）三元共聚物
    Rubber -- Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers

  • ISO 1658:2009 -天然橡膠(NR)--評估程序
    Natural rubber (NR) -- Evaluation procedure

  • ISO 17564:2008 -氫化丁?生橡膠(HNBR)--使用碘值測定殘留非飽和物
    Raw hydrogenated nitrile rubber (HNBR) -- Determination of residual unsaturation by iodine value

  • ISO 1817:2011 -硫化橡膠或熱塑性 - 的液體效果的測定
    Rubber, vulcanized or thermoplastic -- Determination of the effect of liquids

  • ISO 1827:2011 -硫化橡膠或熱塑性 - 測定剪切模量和粘合力剛性板 - 四剪切方法
    Rubber, vulcanized or thermoplastic -- Determination of shear modulus and adhesion to rigid plates -- Quadruple-shear methods

  • ISO 18517:2005 -硫化橡膠或熱塑性橡膠--硬度測試--說明和指南
    Rubber, vulcanized or thermoplastic -- Hardness testing -- Introduction and guide

  • ISO 1853:2011 -導電性能和耗散橡膠，硫化橡膠或熱塑性 - 測量電阻率
    Conducting and dissipative rubbers, vulcanized or thermoplastic -- Measurement of resistivity

  • ISO 18898:2012 -橡膠 - 校準和檢定硬度測試儀
    Rubber -- Calibration and verification of hardness testers

  • ISO 18899:2013 -橡膠 - 指南的試驗設備的校準
    Rubber -- Guide to the calibration of test equipment

  • ISO 188:2011 -硫化橡膠或熱塑性 - 加速老化和耐熱性試驗
    Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat resistance tests

  • ISO 19003:2006 -橡膠與橡膠產品--統計物理測試應用指南
    Rubber and rubber products -- Guidance on the application of statistics to physical testing

  • ISO 19004:2004 -橡膠與橡膠產品--測試方法的靈敏度測定
    Rubber and rubber products -- Determination of the sensitivity of test methods

  • ISO 2007:2007 -未硫化橡膠--可塑性測定--快速塑度計法
    Rubber, unvulcanized -- Determination of plasticity -- Rapid-plastimeter method

  • ISO 21561:2005 -丁苯橡膠(SBR)--溶液聚合型SBR微觀結構的測定
    Styrene-butadiene rubber (SBR) -- Determination of the microstructure of solution-polymerized SBR

  • ISO 21561:2005/Amd 1:2010 -

  • ISO 2230:2002 -橡膠產品--儲存指南
    Rubber products -- Guidelines for storage

  • ISO 22768:2006 -生橡膠--用差示掃描量熱法(DSC)測定玻璃傳導溫度
    Rubber, raw -- Determination of the glass transition temperature by differential scanning calorimetry (DSC)

  • ISO 2285:2013 -硫化橡膠或熱塑性 - 測定張力下恆定伸長設定，和緊張組，在恆定的拉伸負荷伸長率和蠕變
    Rubber, vulcanized or thermoplastic -- Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load

  • ISO 2302:2005 -丁基橡膠(IIR)--評估程序
    Isobutene-isoprene rubber (IIR) -- Evaluation procedures

  • ISO 2303:2011 -異戊二烯橡膠（IR） - 非充油，溶液聚合型 - 評估程序
    Isoprene rubber (IR) -- Non-oil-extended, solution-polymerized types -- Evaluation procedures

  • ISO 2322:2009 -丁苯橡膠(SBR)--乳液和溶液聚合型--評估程序
    Styrene-butadiene rubber (SBR) -- Emulsion- and solution-polymerized types -- Evaluation procedures

  • ISO 23233:2009 -硫化橡膠或熱塑性橡膠--垂直磨盤驅動用抗磨損的測定
    Rubber, vulcanized or thermoplastic -- Determination of resistance to abrasion using a driven, vertical abrasive disc

  • ISO 23337:2007 -硫化橡膠或熱塑性橡膠--用改進的Lambourn測試機測定抗磨損性
    Rubber, vulcanized or thermoplastic -- Determination of abrasion resistance using the Improved Lambourn test machine

  • ISO 23529:2010 -橡膠--物理測試方法制備和一般調節程序
    Rubber -- General procedures for preparing and conditioning test pieces for physical test methods

  • ISO 23794:2010 -硫化橡膠或熱塑性橡膠--磨損測試--指南
    Rubber, vulcanized or thermoplastic -- Abrasion testing -- Guidance

  • ISO 2393:2008 -橡膠測試混合料--製備、混合和硫化--設備和程序
    Rubber test mixes -- Preparation, mixing and vulcanization -- Equipment and procedures

  • ISO 24453:2008 -橡膠--可比單點數據的採集和表示
    Rubber -- Acquisition and presentation of comparable single-point data

  • ISO 24454:2008 -橡膠--可比多點數據的採集和表示
    Rubber -- Acquisition and presentation of comparable multi-point data

  • ISO 2454:1995 -橡膠產品--鋅含量的測定--EDTA滴定法
    Rubber products -- Determination of zinc content -- EDTA titrimetric method

  • ISO 2475:2011 -氯丁橡膠（CR） - 通用型 - 評估程序
    Chloroprene rubber (CR) -- General-purpose types -- Evaluation procedure

  • ISO 2476:2009 -丁二烯橡膠--溶液聚合型--評估程序
    Butadiene rubber (BR) -- Solution-polymerized types -- Evaluation procedures

  • ISO 247:2006 -橡膠--灰分的測定
    Rubber -- Determination of ash

  • ISO 27588:2012 -硫化橡膠或熱塑性 - 採用非常低的橡膠硬度（VLRH）規模測定空載載荷硬度
    Rubber, vulcanized or thermoplastic -- Determination of dead-load hardness using the very low rubber hardness (VLRH) scale

  • ISO 27727:2008 -硫化橡膠--疲勞裂縫擴展率的測量
    Rubber, vulcanized -- Measurement of fatigue crack growth rate

  • ISO 2781:2008 -硫化橡膠或熱塑性橡膠--密度的測定
    Rubber, vulcanized or thermoplastic -- Determination of density

  • ISO 2781:2008/Amd 1:2010 -精確資料
    Precision data

  • ISO 2782-1:2012 -硫化橡膠或熱塑性 - 氣體滲透性的測定 - 第1部分：壓差的方法
    Rubber, vulcanized or thermoplastic -- Determination of permeability to gases -- Part 1: Differential-pressure methods

  • ISO 2782-2:2012 -硫化橡膠或熱塑性 - 測定透氣性的 - 第2部分：等壓法
    Rubber, vulcanized or thermoplastic -- Determination of permeability to gases -- Part 2: Equal-pressure method

  • ISO 2878:2011 -硫化橡膠或熱塑性 - 抗靜電和導電產品 - 電阻測定。
    Rubber, vulcanized or thermoplastic -- Antistatic and conductive products -- Determination of electrical resistance

  • ISO 289-1:2005 -未硫化橡膠--用剪切圓盤型粘度計測定--第1部分：穆尼粘度的測定
    Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 1: Determination of Mooney viscosity

  • ISO 289-1:2005/Cor 1:2009 -

  • ISO 289-2:1994 -未硫化橡膠--用剪切圓盤型粘度計測定--第2部分：預硫化特性的測定
    Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 2: Determination of pre-vulcanization characteristics

  • ISO 289-3:1999 -未硫化橡膠--用剪切圓盤型粘度計測定--第3部分：不加顏料的、充油的、乳聚型丁苯橡膠的δ門尼值的測定
    Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 3: Determination of the Delta Mooney value for non-pigmented, oil-extended emulsion-polymerized SBR

  • ISO 289-4:2003 -未硫化橡膠--用剪切圓盤型粘度計測定--第4部分：門尼應力鬆弛率的測定
    Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 4: Determination of the Mooney stress-relaxation rate

  • ISO 2921:2011 -硫化橡膠 - 低溫回縮測定法（TR試驗）
    Rubber, vulcanized -- Determination of low-temperature retraction (TR test)

  • ISO 2951:2012 -硫化橡膠或熱塑性 - 絕緣電阻的測定
    Rubber, vulcanized or thermoplastic -- Determination of insulation resistance

  • ISO 3384-1:2011 -硫化橡膠或熱塑性 - 測定在壓縮應力鬆弛 - 第1部分：試驗在恆定溫度
    Rubber, vulcanized or thermoplastic -- Determination of stress relaxation in compression -- Part 1: Testing at constant temperature

  • ISO 3384-1:2011/Amd 1:2013 -經修訂的校準計劃
    Revised calibration schedule

  • ISO 3384-2:2012 -硫化橡膠或熱塑性 - 測定在壓縮應力鬆弛 - 第2部分：溫度循環測試
    Rubber, vulcanized or thermoplastic -- Determination of stress relaxation in compression -- Part 2: Testing with temperature cycling

  • ISO 3387:2012 -橡膠 - 用硬度測量測定結晶效應
    Rubber -- Determination of crystallization effects by hardness measurements

  • ISO 34-1:2010 -硫化橡膠或熱塑性橡膠--抗扯裂強度的測定--第1部分：褲形、直角形和新月形測試件
    Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 1: Trouser, angle and crescent test pieces

  • ISO 34-2:2011 -硫化橡膠或熱塑性 - 撕裂強度的測定 - 第2部分：小（代爾夫特）試驗片
    Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 2: Small (Delft) test pieces

  • ISO 3417:2008 -橡膠--用擺振式圓盤硫化計測定硫化特性
    Rubber -- Measurement of vulcanization characteristics with the oscillating disc curemeter

  • ISO 36:2011 -硫化橡膠或熱塑性 - 粘合強度的測定紡織面料
    Rubber, vulcanized or thermoplastic -- Determination of adhesion to textile fabrics

  • ISO 37:2011 -硫化橡膠或熱塑性 - 測定拉伸應力 - 應變特性
    Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties

  • ISO 3865:2005 -硫化橡膠或熱塑性橡膠--接觸有機材料污染的測試方法
    Rubber, vulcanized or thermoplastic -- Methods of test for staining in contact with organic material

  • ISO 4097:2007 -乙烯-丙烯-二烯橡膠(EPDM)--評估程序
    Rubber, ethylene-propylene-diene (EPDM) -- Evaluation procedure

  • ISO 4645:1984 -橡膠與橡膠產品--抗降解劑鑒別指南--薄層色譜法
    Rubber and rubber products -- Guide to the identification of antidegradants -- Thin layer chromatographic methods

  • ISO 4645:1984/Cor 1:1991 -

  • ISO 4647:2010 -硫化橡膠--織物簾線粘合強度的測定--H抽出法
    Rubber, vulcanized -- Determination of static adhesion to textile cord -- H-pull test

  • ISO 4649:2010 -硫化橡膠或熱塑性橡膠--滾筒法進行耐磨損測定
    Rubber, vulcanized or thermoplastic -- Determination of abrasion resistance using a rotating cylindrical drum device

  • ISO 4650:2012 -橡膠 - 鑑定 - 紅外光譜法
    Rubber -- Identification -- Infrared spectrometric methods

  • ISO 4658:1999 -丙烯腈 - 丁二烯橡膠（NBR） - 評估步驟
    Acrylonitrile-butadiene rubber (NBR) -- Evaluation procedure

  • ISO 4658:1999/Amd 1:2004 -

  • ISO 4659:2003 -苯乙烯-丁二烯橡膠(炭黑或炭黑充油母煉膠)--評估方法
    Styrene-butadiene rubber (carbon black or carbon black and oil masterbatches) -- Evaluation procedure

  • ISO 4661-2:1987 -硫化橡膠--樣品和測試物件制備--第2部分：化學測試
    Rubber, vulcanized -- Preparation of samples and test pieces -- Part 2: Chemical tests

  • ISO 4662:2009 -硫化橡膠或熱塑性橡膠--彈性測定
    Rubber, vulcanized or thermoplastic -- Determination of rebound resilience

  • ISO 4662:2009/Cor 1:2010 -

  • ISO 4664-1:2011 -硫化橡膠或熱塑性 - 動態性能的測定 - 第1部分：通則
    Rubber, vulcanized or thermoplastic -- Determination of dynamic properties -- Part 1: General guidance

  • ISO 4664-2:2006 -硫化橡膠或熱塑性橡膠--動態性能的測定--第2部分：低頻率扭矩擺錘法
    Rubber, vulcanized or thermoplastic -- Determination of dynamic properties -- Part 2: Torsion pendulum methods at low frequencies

  • ISO 4665:2006 -硫化橡膠或熱塑性橡膠--抗風化能力
    Rubber, vulcanized or thermoplastic -- Resistance to weathering

  • ISO 4666-1:2010 -硫化橡膠--撓曲計測試測定溫度上升和抗疲勞性--第1部分：基本原則
    Rubber, vulcanized -- Determination of temperature rise and resistance to fatigue in flexometer testing -- Part 1: Basic principles

  • ISO 4666-2:2008 -硫化橡膠--撓曲計測試測定溫度上升和抗疲勞性--第2部分：旋轉式撓度計
    Rubber, vulcanized -- Determination of temperature rise and resistance to fatigue in flexometer testing -- Part 2: Rotary flexometer

  • ISO 4666-3:2010 -硫化橡膠--撓曲計測試測定溫度上升和抗疲勞性--第3部分：壓縮撓曲計(恆應變式)
    Rubber, vulcanized -- Determination of temperature rise and resistance to fatigue in flexometer testing -- Part 3: Compression flexometer (constant-strain type)

  • ISO 4666-4:2007 -硫化橡膠--撓曲計測試測定溫度上升和抗疲勞性--第4部分：恒定應力撓曲計
    Rubber, vulcanized -- Determination of temperature rise and resistance to fatigue in flexometer testing -- Part 4: Constant-stress flexometer

  • ISO 48:2010 -硫化橡膠或熱塑性橡膠--硬度的測定(10-100IRHD)
    Rubber, vulcanized or thermoplastic -- Determination of hardness (hardness between 10 IRHD and 100 IRHD)

  • ISO 5478:2006 -橡膠--苯乙烯含量的測定--硝化法
    Rubber -- Determination of styrene content -- Nitration method

  • ISO 5600:2011 -橡膠 - 粘合強度的測定採用圓錐形部分剛性材料
    Rubber -- Determination of adhesion to rigid materials using conical shaped parts

  • ISO 5603:2011 -硫化橡膠 - 粘合強度的測定鋼絲帘線
    Rubber, vulcanized -- Determination of adhesion to wire cord

  • ISO 6101-1:1991 -橡膠--用原子吸收光譜法測定金屬含量--第1部分：鋅含量的測定
    Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 1: Determination of zinc content

  • ISO 6101-2:1997 -橡膠--用原子吸收光譜法測定金屬含量--第2部分：鉛含量的測定
    Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 2: Determination of lead content

  • ISO 6101-3:1997 -橡膠--用原子吸收光譜法測定金屬含量--第3部分：銅含量的測定
    Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 3: Determination of copper content

  • ISO 6101-4:1997 -橡膠--用原子吸收光譜法測定金屬含量--第3部分：錳含量的測定
    Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 4: Determination of manganese content

  • ISO 6101-5:2006 -橡膠--用原子吸收光譜法測定金屬含量--第5部分：鐵含量測定
    Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 5: Determination of iron content

  • ISO 6101-6:2011 -橡膠 - 測定原子吸收光譜法測定金屬含量 - 第6部分：鎂含量的測定
    Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 6: Determination of magnesium content

  • ISO 6133:1998 -橡膠和塑料--撕裂強度和粘合強度測定中的多峰曲線分析
    Rubber and plastics -- Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

  • ISO 6502:1999 -橡膠--硫化計的使用指南
    Rubber -- Guide to the use of curemeters

  • ISO 6505:2005 -硫化橡膠或熱塑性橡膠--對腐蝕金屬粘合趨勢的測定
    Rubber, vulcanized or thermoplastic -- Determination of tendency to adhere to and corrode metals

  • ISO 6528-1:1992 -橡膠--總硫量的測定--第1部分：氧氣燃燒瓶法
    Rubber -- Determination of total sulfur content -- Part 1: Oxygen combustion flask method

  • ISO 6528-2:1992 -橡膠--總硫量的測定--第2部分：過氧化鈉熔融法
    Rubber -- Determination of total sulfur content -- Part 2: Sodium peroxide fusion method

  • ISO 6528-3:1988 -橡膠--總硫量的測定--第3部分：高溫爐燃燒法
    Rubber -- Determination of total sulfur content -- Part 3: Furnace combustion method

  • ISO 6914:2013 -硫化橡膠或熱塑性 - 測定老化特性通過在張力應力鬆弛的測定
    Rubber, vulcanized or thermoplastic -- Determination of ageing characteristics by measurement of stress relaxation in tension

  • ISO 6943:2011 -硫化橡膠 - 張力測定疲勞
    Rubber, vulcanized -- Determination of tension fatigue

  • ISO 7269:1995 -橡膠--游離硫測定
    Rubber -- Determination of free sulfur

  • ISO 7269:1995/Cor 1:2002 -

  • ISO 7270-1:2003 -橡膠--熱解氣相色譜分析法--第1部分：聚合物(單聚合物和共混聚合物)的標識
    Rubber -- Analysis by pyrolytic gas-chromatographic methods -- Part 1: Identification of polymers (single polymers and polymer blends)

  • ISO 7270-1:2003/Amd 1:2010 -

  • ISO 7270-2:2012 -橡膠 - 分析由熱分解氣相色譜法 - 第2部分：苯乙烯/丁二烯/異戊二烯比率的測定
    Rubber -- Analysis by pyrolytic gas-chromatographic methods -- Part 2: Determination of styrene/butadiene/isoprene ratio

  • ISO 7323:2006 -未硫化混煉生膠--可塑性和回彈性的測定--平行板法
    Rubber, raw and unvulcanized compounded -- Determination of plasticity number and recovery number -- Parallel-plate method

  • ISO 7619-1:2010 -硫化橡膠或熱塑性橡膠--壓痕硬度的測定--第1部分：硬度計法(肖氏硬度)
    Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)

  • ISO 7619-2:2010 -硫化橡膠或熱塑性橡膠--壓痕硬度的測定--第2部分：可?式橡膠國際硬度計法
    Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 2: IRHD pocket meter method

  • ISO 7663:2005 -鹵化異丁烯-異戊二烯橡膠(BIIR--and--CIIR)
    Halogenated isobutene-isoprene rubber (BIIR and CIIR) -- Evaluation procedures

  • ISO 7725:1991 -橡膠與橡膠產品--溴和氯含量的測量--氧瓶燃燒法
    Rubber and rubber products -- Determination of bromine and chlorine content -- Oxygen flask combustion technique

  • ISO 7743:2011 -硫化橡膠或熱塑性 - 測定壓縮應力 - 應變性能的
    Rubber, vulcanized or thermoplastic -- Determination of compression stress-strain properties

  • ISO 7780:1998 -橡膠和橡膠膠乳--錳含量的測定--高碘酸鈉光度法
    Rubbers and rubber latices -- Determination of manganese content -- Sodium periodate photometric methods

  • ISO 8013:2012 -硫化橡膠 - 壓縮或剪切蠕變的測定
    Rubber, vulcanized -- Determination of creep in compression or shear

  • ISO 8053:1995 -橡膠和膠乳--銅含量的測定--光度計法
    Rubber and latex -- Determination of copper content -- Photometric method

  • ISO 812:2011 -硫化橡膠或熱塑性 - 測定的低溫脆性
    Rubber, vulcanized or thermoplastic -- Determination of low-temperature brittleness

  • ISO 813:2010 -硫化橡膠或熱塑性橡膠--硬質板材粘合強度的測定 90°剝離法
    Rubber, vulcanized or thermoplastic -- Determination of adhesion to a rigid substrate -- 90 degree peel method

  • ISO 814:2011 -硫化橡膠或熱塑塑料 - 粘附到金屬的測定 - 雙板法
    Rubber, vulcanized or thermoplastic -- Determination of adhesion to metal -- Two-plate method

  • ISO 815-1:2008 -硫化橡膠或熱塑性橡膠--壓縮永久變形的測定--第1部分：室溫或更高溫度
    Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 1: At ambient or elevated temperatures

  • ISO 815-2:2008 -硫化橡膠或熱塑性橡膠--壓縮永久變形的測定--第2部分：低溫條件
    Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 2: At low temperatures

  • ISO 9026:2007 -生橡膠或硫化化合物--原始強度測定
    Raw rubber or unvulcanized compounds -- Determination of green strength

  • ISO 9028:2006 -橡膠--用酸溶解法溶解橡膠
    Rubber -- Dissolution by acid digestion

  • ISO 9924-1:2000 -橡膠與橡膠產品--用熱裂解法測定硫化和未硫化化合物的成分--第1部分：丁二烯、乙烯－丙烯共聚物和三聚物、異丁
    Rubber and rubber products -- Determination of the composition of vulcanizates and uncured compounds by thermogravimetry -- Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers

  • ISO 9924-2:2000 -橡膠與橡膠產品--用熱裂解法測定硫化和未硫化化合物的成分--第2部分：丙烯?丁二烯和丁基鹵化橡膠
    Rubber and rubber products -- Determination of the composition of vulcanizates and uncured compounds by thermogravimetry -- Part 2: Acrylonitrile-butadiene and halobutyl rubbers

  • ISO 9924-2:2000/Amd 1:2012 -

  • ISO 9924-3:2009 -橡膠與橡膠產品--用熱裂解法測定硫化和未硫化化合物的成分--第3部分：萃取後的烴橡膠、鹵化橡膠和聚矽氧烷橡膠
    Rubber and rubber products -- Determination of the composition of vulcanizates and uncured compounds by thermogravimetry -- Part 3: Hydrocarbon rubbers, halogenated rubbers and polysiloxane rubbers after extraction

  • ISO/CD 1817 -硫化橡膠或熱塑性 - 的液體效果的測定
    Rubber, vulcanized or thermoplastic -- Determination of the effect of liquids

  • ISO/CD 21561-2 -苯乙烯 - 丁二烯橡膠（SBR） - 測定溶液聚合丁苯橡膠的微觀結構 - 第2部分：與FTIR ATR法
    Styrene-butadiene rubber (SBR) -- Determination of the microstructure of solution-polymerized SBR -- Part 2: FTIR with ATR method

  • ISO/CD 2782-1 -硫化橡膠或熱塑性 - 氣體滲透性的測定 - 第1部分：壓差的方法
    Rubber, vulcanized or thermoplastic -- Determination of permeability to gases -- Part 1: Differential-pressure methods

  • ISO/CD 4097 -橡膠，乙烯 - 丙烯 - 二烯橡膠（EPDM） - 評估步驟
    Rubber, ethylene-propylene-diene (EPDM) -- Evaluation procedure

  • ISO/CD 48 -硫化橡膠或熱塑性 - 硬度的測定（10 IRHD和100 IRHD之間的硬度）
    Rubber, vulcanized or thermoplastic -- Determination of hardness (hardness between 10 IRHD and 100 IRHD)

  • ISO/DIS 11346 -硫化橡膠或熱塑性 - 生命的時間和最高使用溫度的估計
    Rubber, vulcanized or thermoplastic -- Estimation of life-time and maximum temperature of use

  • ISO/DIS 1434 -在包天然橡膠 - 應收包塗料 - 測定
    Natural rubber in bales -- Amount of bale coating -- Determination

  • ISO/DIS 18766 -硫化橡膠或熱塑性 - 低溫試驗 - 一般介紹和指南
    Rubber, vulcanized or thermoplastic -- Low temperature testing -- General introduction and guide

  • ISO/DIS 19242 -橡膠 - 離子色譜法測定總硫含量
    Rubber -- Determination of total sulfur content by ion chromatography

  • ISO/DIS 2322 -苯乙烯 - 丁二烯橡膠（SBR） - 乳液和溶液聚合型 - 評估程序
    Styrene-butadiene rubber (SBR) -- Emulsion- and solution-polymerized types -- Evaluation procedures

  • ISO/DIS 2393 -橡膠試驗混合 - 配料，混煉和硫化 - 設備和程序
    Rubber test mixes -- Preparation, mixing and vulcanization -- Equipment and procedures

  • ISO/DIS 2476 -丁二烯橡膠（BR） - 解決方案 - 聚合型 - 評估程序
    Butadiene rubber (BR) -- Solution-polymerized types -- Evaluation procedures

  • ISO/DIS 6101-3 -橡膠 - 測定原子吸收光譜法測定金屬含量 - 第3部分：銅含量的測定
    Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 3: Determination of copper content

  • ISO/DIS 6101-4 -橡膠 - 測定原子吸收光譜法測定金屬含量 - 第4部分：錳含量的測定
    Rubber -- Determination of metal content by atomic absorption spectrometry -- Part 4: Determination of manganese content

  • ISO/DIS 815-1 -硫化橡膠或熱塑性 - 測定壓縮永久變形的 - 第1部分：在室溫或高溫下
    Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 1: At ambient or elevated temperatures

  • ISO/DIS 815-2 -硫化橡膠或熱塑性 - 壓縮永久變形的測定 - 第2部分：在低溫下
    Rubber, vulcanized or thermoplastic -- Determination of compression set -- Part 2: At low temperatures

  • ISO/NP 23794 -硫化橡膠或熱塑性 - 耐磨測試 - 指導
    Rubber, vulcanized or thermoplastic -- Abrasion testing -- Guidance

  • ISO/PRF 17257 -橡膠 - 識別聚合物 - 利用大量的光譜檢測熱裂解氣相色譜法
    Rubber -- Identification of polymers -- Pyrolytic gas-chromatographic method using mass-spectrometric detection

  • ISO/PRF 289-1 -橡膠，未硫化的 - 用剪切圓盤型粘度計的測定 - 第1部分：門尼粘度的測定
    Rubber, unvulcanized -- Determinations using a shearing-disc viscometer -- Part 1: Determination of Mooney viscosity

  • ISO/TR 12134:2010 -橡膠--測試方法之不確定性評估--非功能參數
    Rubber -- Estimation of uncertainty for test methods -- Non-functional parameters

  • ISO/TR 7620:2005 -橡膠材料--耐化學性
    Rubber materials -- Chemical resistance

  • ISO/TR 9272:2005 -橡膠和橡膠製品--測試方法標準的精確度測定
    Rubber and rubber products -- Determination of precision for test method standards

  • ISO/TS 17796:2013 -橡膠 - 捕獲和識別橡膠煙霧與聚（2,6 - diphenylphenylene氧化物）型的吸附劑，採用熱解吸和氣相色譜法與質譜檢測活性採樣的揮發性組分的
    Rubber -- Trapping and identification of volatile components of rubber fumes with active sampling on a poly(2,6-diphenylphenylene oxide) type sorbent, using thermodesorption and gas chromatographic method with mass spectrometric detection

Lawlove Corporation ©2020 永久和平發展協會 版權所有 Copyright. All rights reserved.